<code id="sa0bz"></code>
    <th id="sa0bz"></th>

  1. <strike id="sa0bz"></strike>
      <strike id="sa0bz"></strike><del id="sa0bz"><small id="sa0bz"></small></del>
      <th id="sa0bz"><video id="sa0bz"></video></th>

      email: tony@lathes.co.uk
      Home   Machine Tool Archive   Machine-tools for Sale & Wanted
      Machine Tool Manuals   Machine Tool Catalogues   Belts   
      Books   Accessories


      Myford ML7 LATHE

      Myford ML7 Photo Essay

      Myford Home Page    Detailed Myford 7 Series Article   Tri-lever ML7
           
      ML7 Serial Numbers   Rodney Milling Attachment
       
      ML7 Lathes New in the Box   Amolco Milling Attachment   ML7R
       
      ML7 Capstan   Accessories   ML7 Rebuild

      A complete data pack on the ML7 is available here
      and a dedicated book on all Series 7 lathes here


      This is a "summary and photographic" page: for a detailed description of the Myford ML7 and other Myford Series 7 and Series 10 models, click here for the Myford home page. An interesting article about rebuilding an ML7 here and a photo essay about the ML7 here. Occasionally unused ML7 lathes are discovered, two entirely original ones are shown on this page and another lower down this page.

      When it was unveiled in August, 1946 (at ?4, without a motor) the Myford ML7 lathe was greeted with astonishment. Designed by Ted Barrs during the closing years of WW2 (1939-1945), here was a well-designed, compact lathe with a neatly built-on motor-countershaft unit, fully guarded belts and changewheels - and with a specification guaranteed to delight any model engineer who had struggled with the inadequate machines offered by a host of  under-capitalised, smaller English machine-tool makers in the pre-war years. The concept was not, however, new for the same kind of integrated design had been introduced as long ago as 1932 in the form of the 9-inch Atlas (developed into the long-lived 10-inch model), and the neat little "6-inch" first made in 1937.
      An immediate sales success in both Britain and overseas - when exports were vital to the country's prosperity following WW2 -  many British customers, with an ex-Services gratuity burning a hole in their pocket had to wait until vital export orders were fulfilled - the cry of the day being, "Export or Die" - and waiting lists ran to over 12 months.  The lathe continued in production until 1979 and, because the design was so right to begin with, only very minor changes in specification were made over the years with the same design of cross and top slide units surviving until the late 1990s on the Super 7 based  ML7R model.
      All Myford ML7 lathes included a K prefix in their serial number (other designations include the ML.5 Capstan lathe as the "F", the M.U. capstan as the "G", the M.L.6 capstan as "H" and the Myford/Drummond M-Type as "J").
      The ML7R was not based on the ML7 but on the Super 7 - the model being created by leaving off the spindle clutch and fitting the less expensive cross and top slides from the ordinary ML7.
      A detailed description of the Myford ML7, and other Myford Series 7 and 10 models, can be found here, an interesting article about rebuilding an ML7 here and a photo essay about the ML7 here.
      A number of copies of the ML7 have been found, some quite dreadful but also including a rather fine one, shown at the bottom of the page, by the Italian firm Minganti.

      Some pictures are high resolution and may take time to load

      Badge used on the spindle belt
      guard cover on all ML7 lathes


      1947 - and the Myford publicity department produced this sectional drawing. For a very high-resolution download (39MB) that you can copy to an pen-drive and have printed out in colour on an A2 sheet by your local graphics shop, click on the picture or here (be patient, it takes time?

      Discovered unused in 2012, this ML7 is shown as delivered to the customer and requiring basic assembly. Another two examples, in original finishes, can be seen

      An unused ML7, found in its crate during 2012. The original paint having deteriorated in storage, the owner repainted in Myford colours. The only non-original point is that the My




      Standard ML7 
      3.5" centre height and 20" between centres, backgeared and screwcutting.

      Pride of ownership - a restored Myford ML7B with spindle clutch - the B suffice indicating a screwcutting gearbox

      The ordinary maker's stand lack a door and collet storage - deficiencies
      easily overcome by many enthusiastic owners

      Useful accessories: in the foreground a screwcutting metric conversion set
      and, left towards the back, the Burnerd half-depth body 6-inch 4-jaw chuck

      Carriage assembly clearly showing the extended bridge casting on the end of the cross slide that gave a useful increase in travel; this was of special benefit when using a vertical milling slide. The micrometer dial fitted is the later machined and engraved type.

      ML7 bed numbers started at 1001, so this is the 183-third. machine made. The number can be found stamped at the tailstock-end of the bed, on the rear vertical shear. If a letter "R" is present, this indicated a bed that has been reground at the Myford factory

      Even earlier - the 16th ML7

      Standard ML7 headstock detail

      ML7 drive system with rubber-bushed, "resilient-mount" motor - which is by far the best type to use.

      Countershaft drive unit from a very early ML7.
      The cut-out sections in the upright were filled in on later models and the full length hinge pin through the base of the motor platform changed to two short studs.

      Clutch equipped ML7 with changewheel cover removed and belt guard lifted

      Rodney Vertical Milling attachment. Clamped to the bed, the drive was taken to the miller from a No. 2 Morse taper plug in the headstock via. a flexible coupling. A drilling quill and fine down-feed were fitted and the nose of the miller was fitted with a standard Myford spindle nose thread. A smaller, simpler version was also produced without the quick-action drill feed.

      An ML7 converted for production work and fitted with a lever-operated collet chuck, cross slide mounted turret attachment and a cut-off slide. Visible just behind the bed is the top part of a multi-stop unit, used to provide a dead-length stop to the saddle movement. Besides the items illustrated, a much larger bed-mounted capstan unit was available with built-in stops and auto indexing. Some lathes were sold ready converted for production work with the screwcutting gear, compound slides and tailstock removed - and sometimes fitted with the Tri-Leva spindle speed selector and a two-speed motor.




      Myford C7 Capstan. An early standard-production version (identifiable by the screw-feed cut-off slide) fitted with a Tri-leva spindle speed selector, standard bed-mounted capstan head, coolant unit and two-speed electric motor.

      Early headstock-bearing oiler -  replaced by transparent drip-feed oilers in the late 1940s

      The lovely "Acorn" knob fitted to the tumble reverse and backgear levers

      Branded as a MI-BO (cast into the front face of the headstock) this Italian-made Minganti Myford ML7 copy was discovered in Canada (unlike the better-known Taiwanese copies, one has yet to be found in the United Kingdom). At a guess it would have been made in the early 1960s, the use of the earlier "open" tailstock casting but inclusion of Super 7-like cross and top-slide handles being the clues. However, perhaps the makers had to hand an earlier example of the original ML7, the micrometer dials are of the MAKAK type, the headstock bearing are lubricated through turn-to-open wick-feed oil caps, ball-spring oilers are in evidence on slideways, tailstock and leadscrew hanger bearings and an early type curved leadscrew guard is fitted .
      Minganti appear to have produced not only a very high-quality copy with smooth castings and fine detailing but, by using a double-step pulley on the motor to countershaft drive, one with 12 speeds running from 32 to 1200 r.p.m instead of the original rather slow 6 that spanned a rather slow 35 to 640). It might be that the headstock bearings were also improved with the use of bronze instead of white metal - a solution for higher speeds that was offered in later years by Myford as a replacement assembly.
      If you have a Minganti-Myford the writer would be interested to hear from you
      A translation from an Italian web site:
      "Minganti Joseph , one of the pioneers of the Italian machine tools, was formed in his father working abroad. In 1919 he began to produce their own letter-book presses, moulds for containers cachet and a small drill press . Within a few years the business grew and moved the shop in Via della Fontanina to a new factory in Via Ferrarese .
      He was always beside his wife Gilberte Gabrielli , who took charge of the organizational and accounting side of the business. At the Paris Exposition of 1928 Minganti presented the first lathe with hydraulic control and continuously variable speeds , the patents taken out giving him international fame. Then came other machine tools including drills and milling machines, as well as a number of special machines for the packing of cigarettes and production of bearings, wire mesh and, pistons. In 1936 , during the period when Italy tried to become self-sufficient in industrial production, the Company manufactured turret (capstan) lathes - models that proved to be of excellent quality and the equal of foreign ones .
      During the WW2, in 1943, the factory was hit hard by a bombing raid and subsequently the German command decided to confiscate the factory's machine tools and transport them in Germany, but Minganti fought the request to obtain the transfer of the machinery and of its engineers to Palazzolo .
      When her husband died during the difficult process of reconstruction and in the following decades , it was the wife Gilberte to lead the Company with intelligence and determination, qualities that were recognized with her appointment in 1964, as the first woman in Italy to be awarded the Knight of Merit of Labour.
      The company moved in the early sixties in a modern industrial complex, in Via Ferrarese, and contto successfully produce machine tools, precision grinding machines, vertical lathes and automatic."
       http://www.comune.bologna.it/memoriabologna/servizi/107:7100/7109/

      Mford ML7 Serial Numbers

      MYFORD ML7
      1001 = 1946
      1090 = 1946
      2045 = 1947
      2510 = 1947
      3112 = 1948
      3520 = 1948
      5105 = 1948
      5608 = 1949
      6849 = 1949
      7005 = 1949
      8992 = 1949
      10550 = 1950
      12762 = 1950
      14067 = 1950
      16879 = 1951
      16903 = 1951
      18447 = 1951
      19900 = 1951
      20600 = 1952
      21894 = 1952
      26323 = 1953
      28906 = 1953
      30989 = 1954
      31592 = 1954
      32045 = 1954
      33200 = 1955
      33607 = 1955
      34103 = 1955
      35670 = 1956
      36002 = 1956
      36167 = 1956
      38115 = 1957
      39100 = 1957
      41393 = 1958
      42203 = 1959
      42820 = 1959
      44781 = 1960
      45012 = 1960
      46203 = 1960
      48165 = 1961
      49002 = 1961
      51232 =1962
      51675 = post 1962
      54013 = 1962
      60200 = 1963
      64987 = 1964
      71006 = 1965
      75138 = approx 1966
      75154 = approx 1966
      81275 = 1967
      82989 = 1968
      85000 = 1968 approx
      90125 = 1969
      96783 = 1970
      98501 = 1970 approx
      104879 = 1972
      110045 = approx 1972 no factory data on that machine
      114516 = Super 7 1973
      115603 = 1971
      118706 = 1974
      121348 = 1974
      130116 = 1974
      132453 = 1977
      133713 = 1977
      135151 = April 1977 really ?
      136278 = not found
      138100 = 1978
      140,848 = January 31st 1979 = last machine   


      A complete data pack on the ML7 is available here
      and a dedicated book on all Series 7 lathes here


      Myford ML7 LATHE
      Myford ML7 Photo Essay
      Myford Home Page    Detailed Myford 7 Series Article   Tri-lever ML7     ML7 Serial Numbers   Rodney Milling Attachment   
      Amolco Milling Attachment   ML7R 
      ML7 Capstan   Accessories   ML7 Rebuild


      email: tony@lathes.co.uk
      Home   Machine Tool Archive   Machine-tools for Sale & Wanted
      Machine Tool Manuals   Machine Tool Catalogues   Belts   
      Books   Accessories
      ǮֻϷ