<code id="sa0bz"></code>
    <th id="sa0bz"></th>

  1. <strike id="sa0bz"></strike>
      <strike id="sa0bz"></strike><del id="sa0bz"><small id="sa0bz"></small></del>
      <th id="sa0bz"><video id="sa0bz"></video></th>

      email: tony@lathes.co.uk
      Home   Machine Tool Archive   Machine-tools for Sale & Wanted
      Manuals   Machine Tool Catalogues   Belts   Books   Accessories

      lathes.co.uk
      Lathe Spindle Nose & Backplate Fittings
      Parts Home Page

      Screwcutting    Countershafts    Backgear    The Watchmaker's Lathe   

      Tumble Reverse   Quick-change Toolholders   Fitting a Chuck   

      Spindle Nose Fittings    More Names of Parts   Epicyclic Backgears

      Stuck Chuck   Countershafts, Jackshafts & Spindle Speeds   Oiling

         Reading Microscopes, Bevel Protractors, Combination Squares
      and using Calipers & Dividers, etc.

      Be sure to click the hyperlinks above for a complete picture
      of how a lathe and associated equipment functions




      The well-known "cam-lock" spindle fitting

      For many years chucks, faceplates and catchplates were simply screwed onto the end of the lathe's spindle; a bewildering variety of types and sizes of thread were used and non were standardised between manufactures. Although cheap to manufacture and perfectly adequate for most purposes, especially amateur use, threads do have serious limitations centred around safety, rigidity and ease of removal and replacement. To take just one example: a threaded fitting cannot safely be run backwards and, whilst a chuck might happily stay in place as a lathe accelerates up to top speed in reverse, once there it cannot be so easily stopped. Legion are the number of serious accidents caused where an operator has stated a lathe in reverse, realised his mistake, and then (without thinking) applied the spindle brake. Once the chuck starts to unscrew the workman can do nothing but watch in horror as the 200 lb mass, rotating at 800 rpm, accelerates down the length of the workshop smashing machines and people unfortunate enough to be in its way.
      To overcome this, and other limitations of threaded fittings, many alternative designs have appeared over the years that are safer, more rigid and easily mounted and removed.: the following pages illustrate the most popular and frequently encountered types for both direct and  backplate mounting. To understand the fitting look through the links to both Spindle Nose Fittings and Backplate Fittings shown immediately below:


      SPINDLE NOSE FITTINGS
      American long Taper with Drive Key and Draw-nut Types L00, L0, L1, L2 and L3

      AMERICAN STANDARD SPINDLE NOSES - Direct Mounting

      American short Taper with Bolt or Stud Fixing Types A1, A2, B1 and B2

      American short Taper with Camlock Fitting Type D1

      British and ISO Standard Spindle Noses - Direct Mounting

      British & ISO Short Taper with Bolt or Stud Fixing

      British & ISO Short Taper with Camlock Fixing

      British & ISO short Taper with Bayonet Ring Fixing

      German Standard Spindle Noses

      BACKPLATE  FITTINGS
      Cam-lock D1-2", D1-4" etc

      American Long Taper L Types L00, L1, L2 and L3

      Short Taper A-1, A-2, B-1, B-2, with Bayonet

      "A Type" Screw Fitting

      Click here for a PDF of spindle nose fittings



      ǮֻϷ