<code id="sa0bz"></code>
    <th id="sa0bz"></th>

  1. <strike id="sa0bz"></strike>
      <strike id="sa0bz"></strike><del id="sa0bz"><small id="sa0bz"></small></del>
      <th id="sa0bz"><video id="sa0bz"></video></th>

      email: tony@lathes.co.uk
      Home   Machine Tool Archive   Machine-tools for Sale & Wanted
      Machine Tool Manuals   Machine Tool Catalogues   Belts   Books   Accessories

      HARDINGE HLV & HLV-H Lathe Accessories

      Hardinge HLV-H Home Page

      Model HLV - early narrow-bed type 
      Hardinge DV-59, DSM-59, TFB-H, HC-AT, HSL-59 & HC   
      Hardinge History  Hardinge Millers 
      HLV & HLV-H Accessories
      Early Hardinge Cataract Toolroom Lathe   
      Late "split-bed" Model TL Toolroom Lathe  Plain Lathes 1930/40s
      HLV-H Copies: Barer, Cyclematic & Sharp

      A Data Pack is available for the early HLV and a Handbook,
      Parts Manual and Maintenance Manual for the HLV-H



      4-station turret for cross slide mounting
      A super-precision turret, capable of indexing to within 0.0001" and based on the design of that used on the Hardinge Chucking machine turrets. The main body of the unit rotates on  pre-loaded angular-contact bearings with the indexing and locking shaft also ball- bearing mounted .

      Tool post grinder with single phase motor. This units mounts straight into the T slot of the top slide.

      Four-position indexing stop for cross slide - and precision 4-way toolpost.
      The unit, mounted on the cross slide and saddle top, incorporates a 0.0001" dial indicator with over-run protection.

      Micrometer carriage stop
      The micrometer barrel can be seen bolted to the leading edge of the saddle - whilst the adjustable bed clamp also carries a dial test indicator. The unit is designed to assist the turning of exact shoulder lengths and facing to close tolerances.

      Carriage Length Indicator
      This compact unit which attaches via the front headstock mounting bolt, is designed to allow the cutting tool to approach as closely as possible to the spindle face.

      Rear Tool Holder Slide Assembly
      In place of a simple rear toolpost Hardinge provide this very useful assembly with a raising block and slide. It is fitted with two locking screws and besides being capable of "inverted turning" using ordinary tools, the unit accepts several optional devices including a patented Cut-off Tool Holder, a Circular Form Toolholder and Multiple Tool Holder.

      Taper turning attachment. The button protruding through the top of the saddle is the oil pump plunger.

      HARDINGE HLV & HLV-H Lathe Accessories

      Hardinge HLV-H Home Page

      Model HLV - early narrow-bed type 
      Hardinge DV-59, DSM-59, TFB-H, HC-AT, HSL-59 & HC   
      Hardinge History  Hardinge Millers 
      HLV & HLV-H Accessories
      Early Hardinge Cataract Toolroom Lathe   
      Late "split-bed" Model TL Toolroom Lathe  Plain Lathes 1930/40s
      HLV-H Copies: Barer, Cyclematic & Sharp

      A Data Pack is available for the early HLV and a Handbook,
      Parts Manual and Maintenance Manual for the HLV-H

      email: tony@lathes.co.uk
      Home   Machine Tool Archive   Machine-tools for Sale & Wanted
      Machine Tool Manuals   Machine Tool Catalogues   Belts   Books   Accessories
      ǮֻϷ