<code id="sa0bz"></code>
    <th id="sa0bz"></th>

  1. <strike id="sa0bz"></strike>
      <strike id="sa0bz"></strike><del id="sa0bz"><small id="sa0bz"></small></del>
      <th id="sa0bz"><video id="sa0bz"></video></th>

      email: tony@lathes.co.uk
      Home   Machine Tool Archive   Machine-tools Sale & Wanted
      Machine Tool Manuals   Catalogues   Belts   Books  Accessories

      Ceriotti FCB-32 Capstan Lathe


      Manufactured during the 1970s by a small Company, Ceriotti F.LII then at Viale, 1V Novembre, 11 Bienate to the north west of Milan, the Ceriotte FCB-32 capstan was one of the last of a dying breed, a small  hand-operated production lathe of conventional design. However, despite its imminent replacement by much more expensive NC and CNC machines, the Ceriotti was popular enough to be marketed in the UK with a number of examples sold. Ceriotti appear in Italian trade books of the period as makers of just capstan lathes and little is known of the Company's background or products. Se qualche lettore sa di pi?su Ceriotti, l'autore di questo articolo sar?lieto di sentire da voi.
      Of high-quality and very rigid and heavy constructor, FCB-32 had a centre height of 130 mm with a maximum distance between spindle nose and turret face of 120 mm. The maximum round collet capacity was (reflecting the lathe's designation) 32 mm with a 33 mm hole through the roller-bearing supported, chrome-nickel case-hardened and ground spindle; a lever-action collet closer was, of course, built in
      Two versions of the lathe were offered: a standard model driven by a 2-speed (700/1400 r.p.m.) 2/2.5 h.p. motor and a version with a speed-reducer/reversing unit that had a 2-speed (1400/28000 r.p.m.) 2.5/3 h.p. motor. The latter machine was fitted with a double (adjustable) clutch that allowed reverse to be selected and engaged while running forwards and, at the same time, for the speed to be reduced. On both types drive from the motor was by two-stage double V-belts with the final drive over 3-step pulleys giving a total of seven speeds on the standard model of: 260, 340, 680, 850, 1125, 1700 and 2250 and twelve speeds on the clutched model of: 80, 120, 160, 200, 240, 370, 400, 600, 800, 1000, 1200 and 2000 r.p.m.
      Inclined at 20? the 6-station turret tool 22 mm shank tooling, had a slide travel of 120 mm and was fitted with the usual screw-adjusted stops. Two lever-action cut-off slides were offered, each holding the usual front and back toolposts: a standard unit with 60 mm of travel and an extra-cost compound unit with 65 mm of travel across the bed and 50 of longitudinal travel on the top slide.
      Optional extras included a rather unusual vertically mounted cut-off slide, a headstock-mounted chase-screwcutting attachment, a bar-feed unit and the usual wide selection of turret tooling.

      Ceriotti FCB-32 shown with the optional clutch and speed-reducing unit and vertical cut-off slide

      Maker's bar-feed attachment

      Optional clutch and speed-reducer unit (the two clutches are visible on the lower shaft)


      Headstock-mounted chase-screwcutting attachment

      Unusual headstock-mounted vertical cut-off slide

      Cut-off slide in its compound form with lever-action top slide

      A selection of typical tooling for the turret


      email: tony@lathes.co.uk
      Home   Machine Tool Archive   Machine-tools Sale & Wanted
      Machine Tool Manuals   Catalogues   Belts   Books  Accessories

      Ceriotti FCB-32 Capstan Lathe
      ǮֻϷ