<code id="sa0bz"></code>
    <th id="sa0bz"></th>

  1. <strike id="sa0bz"></strike>
      <strike id="sa0bz"></strike><del id="sa0bz"><small id="sa0bz"></small></del>
      <th id="sa0bz"><video id="sa0bz"></video></th>

      lathes.co.uk home page

      Lathes.co.uk - Machine Tool
      Catalogues, Sales & Technical Specification Literature

       

      This page is catalogues only - for Technical Manuals and Parts Lists click here

      Only a fraction of our catalogues is listed; for data about a specific machine phone: 01298-871633 or e-mail: tony@lathes.co.uk


      For personal attention phone (08:00 to 23:00 GMT): 01298-871633 From overseas: **44-1298-871633 ?/span>or e-mail: manuals@lathes.co.uk
      Click HERE for alternative ordering instructions including PayPal, Credit, Debit and Switch Cards and direct bank transfer.

       

      Always wanted - individual or quantities of machine-tool literature of all kinds. Please phone: 01298-871633 or e-mail: tony@lathes.co.uk?


      All our publications are high-resolution scans, cleaned and post-scanned prepared, printed on top-quality120g paper to preserve as much detail as possible and bound with a clear cover and card back:
      .........I want to congratulate you on the high quality of the material. I have not seen better copies or binding anywhere, and I appreciate it! A lot of time, effort and skill must have been spent to get such high-quality reproductions.
      Best regards, John Coobick.


      Prices are plus ? or ? UK first-class postage and packing. Overseas post is +20%. Minimum overseas postage charge ?. Click here for full ordering instructions



      A18 "AMERICAN" (American Tool Works) Tool Room Lathes Catalogue 1928. Beautiful illustrations together with 6 pages explaining the workings of the relieving attachment, and many other detailed descriptions of the machines' construction and operation. Covers the 12", 14", 16", 18", 20", 24"GP, 24" HP and 27" models. 30 pages ?9

      A18A "AMERICAN" (American Tool Works) 30-inch & 36-inch Lathe Catalogue 4 pages ?2

      A18B "AMERICAN" (American Tool Works) 12" Lathe. Two Catalogues showing the lathe as it developed from the 1920s to the 1930s range. 8 pages ?6

      A18C "AMERICAN" (American Tool Works) Pacemaker Lathes. Range Catalogue 14", 16", 20" MD & 20" HD 1949 42 pages ?5

      A18D "AMERICAN" (American Tool Works) Pacemaker 32" Lathe Catalogue 1958 30 pages ?9

      A18E "AMERICAN" (American Tool Works) Pacemaker 42" Lathe Catalogue 1958 (Wonderful pictures) 22 pages ?9

      A100 ABENE Universal Milling Machines VHF-3 TNC Sales & Technical Specification Catalogue 6 pages ?5

      A100A ABENE Universal Milling Machines. VHF-3 Modern and older Models. Two Sales and Technical Specification Catalogues 12 pages ?2

      A100C Abene VHF-2B older model Sales and Technical Specification Catalogue 4 pages ?2

      A100D Abene VFH-3U Sales and Technical Specification and Technical Specification Catalogue. 2 pages ?2

      ABWOOD - as well as the ones listed below we have many others - please enquire: 01298-871633

      A150 ABWOOD Precision Tool and Die Surface Grinders Types SG1A, SG3H, SG4H. Two comprehensive, very well-illustrated Technical Sales, Specification and Accessories Catalogue. 32 pages. ?9

      A150A ABWOOD 5025 Surface Grinder. Technical Sales, Specification and Accessories Catalogue. 12 pages. ?0

      A150B ABWOOD Sizematic Model SH1H, SG1A, SG3H, SG3, SG4H/HS and SG4H (and variants). Vertical Spindle Surface Grinders. Complete, detailed Catalogue Collection: Technical Sales, Specification and Accessories. 32 pages. ?9

      A150C ABWOOD RT-300 Rotary Table Grinding machine. Technical Sales, Specification and Accessories Catalogue. 4 pages. ?0

      A150D ABWOOD TG-170, TG-170/CB, CG-3A/CB Tool Grinders. Technical Sales, Specification and Accessories Catalogue. 4 pages. ?0

      A150E ABWOOD CG1A, CG2A and CG3A Tool Grinders. Two Technical Sales, Specification and Accessories Catalogues. 6 pages. ?2

      A150F ABWOOD Production Surface Grinder Model ASG2 Technical Sales, Specification and Accessories Catalogue. 2 pages. ?0

      A150G ABWOOD "Concentre" Carbide Tool Grinding and lapping machine with Chip Breaker Attachment. Technical Sales, Specification and Accessories Catalogue. 6 pages. ?5

      A150H ABWOOD RG1 Series Horizontal Rotary Table Surface Grinding machines. Two Technical Sales, Specification and Accessories Catalogues. 16 pages. ?0

      A150J ABWOOD Double-wheel, floor-standing carbide-tool grinding machines. Four Technical Sales and Specification Catalogues covering the entire range from first to last. Includes the first two very early models and then the Concentre in C.G.2, C.G.3 forms,the C.G.2A, C.G.3A, C.G.1A, C.G.0, C.G.2/CB, C.G.3A/CB, C.G.2A/CB, C.B.2P, TG-170 and finally the last made, the TG-170CB and CG-3A/CB. 38 well-illustrated and highly-detailed pages ?0

      A200A ACIERA Complete production Programme Catalogue 1983. Includes: F1, F3, F5, F5EP, F1N, F1H, F3H, F1-CNC, F5-CNC, Servo 7150, ET-3, ET-6,ET-13, ET-22, 22-TR-33, 23-TR-50, 23-TR-52, 6-T1, 13-T1, 22-S2/1, 6-K4, 13-K4, 22-S6, 22-STA, 23-ST-40, 23-ST-42, 22-TNC, 23-TNC, 23-CNC, 25-CNC, NC-30. 20 pages. ?7

      A200B ACIERA Complete production Programme Catalogue 1980. Includes: F1, F3, F5, F5-EP, F1N, F1H, F3H, F4H, F1-CNC, F5-CNC, Servo 7150, ET-3, 22C, 6T1, 13T1, 22-S2/1, 6K4, 13K4, 22S6, ET6, ET13, ET22, 22-TR-33, 23-TR-50, 23-TR-52, 13KT, 22-STA, 23-STA, 23-TNC, 23-NC, 25-NC, G5, NC-30. 20 pages. ?7

      A200C ACIERA F1 Precision Universal Miller: Technical Sales, Specification and Accessories Catalogue. 16 pages. ?5

      A200D ACIERA F1 CNC Milling Machine. Detailed Technical Sales, Specification and Accessories Catalogue. Includes Technical data for the Aciera 2100/2CNC controller, Manual Programming description, etc. 32 pages. ?5

      A200E ACIERA F3 Precision Universal Miller: Late Technical Sales, Specification and Accessories Catalogue for machines with angular styling, circa 1990. 16 pages. ?5

      A200F ACIERA F3 Precision Universal Miller: Early Technical Sales, Specification and Accessories Catalogue for machine with rounded styling, circa 1958 16 pages. ?5

      A200G ACIERA F4 Precision Universal Miller early "ROUNDED-STYLE" model: Sales and Technical Specification Sheet with every accessory listed and illustrated. 16 pages. ?5

      A200H ACIERA F4 Precision Universal Miller LATE "ANGULAR-STYLE" model: Sales and Technical Specification Catalogue with every accessory listed and illustrated. 32 pages. ?7

      A200J ACIERA F5 Precision Universal Miller: Sales and Technical Specification Catalogue with every accessory listed and illustrated. 32 pages. ?7

      A201 ACIERA Type 22 Precision Drilling and tapping machines. Full-Range Sales and Technical Specification Sales and Accessories Catalogue. 20 pages. ?7

      A201A ACIERA 22-STA Boring and Milling Machine: Sales and Technical Specification Catalogue. 11 pages. ?5

      A201B ACIERA 22-STA, 23-ST-40, 23-ST-42 and 23-TNC Precision Co-ordinate Boring and Milling Machines. Sales and Technical Specification Catalogue. 32 pages. ?7

      A201C ACIERA 22-TRA Production Drilling machine. Sales and Technical Specification Catalogue. 4 pages. ?

      A201D ACIERA Type 13 Precision Drill: Sales and Technical Specification Catalogue. 5 pages. ?

      A201E ACIERA Type 7150 Precision Drilling Machine. Sales and Technical Specification Catalogue. 2 pages. ?

      A201F ACIERA Type 6 Drilling and Tapping. Sales and Technical Specification Catalogue. 2 pages. ?

      A201G ACIERA ET-3 Tapping machine. Sales and Specification Sheet. 1 page. ?

      A350A ACORNTOOLS capstan lathe (a re-badged Atlas by Halifax) 2 Sales and Technical Specification Catalogues. 8 pages ?5

      A350B ACORNTOOLS 5-inch centre height lathe (Atlas Clone by Halifax) Sales and Technical Specification Catalogue. 8 pages ?8

      A350C ACORNTOOLS Shaper (Atlas Clone) Sales and Technical Specification Catalogue. 7 pages ?5

      ADAMS - GEORGE ADAMS - See below under "George Adams"

      MA405 Adcock & Shipley No.0 Miller ALL TYPES - a complete collection of data covering the ordinary screw-feed types and: 0C, 0A, 0A1, 0A2, 0A3, 0AD, 0C, 0C1, 0C2, 0C3, 0CD,0B, 0D, 01, 02, 03, 0B1, 0B2, 0B3, 0BD: Sales & Technical Specification Catalogue 22 pages ?7

      A406 ADCOCK and SHIPLEY Milling Machines from the 1930s and 1940 Horizontal and Vertical Types: No.0, No.1, No.2, No.2AG and No.3 Models. 36 pages ?9

      A406A3 ADCOCK and SHIPLEY No.3 Milling Machine from the 1940s (Large speed-change dial on the right-hand face of the column) Sales and Technical Specification Catalogue with annotated pictures of the control levers and their functions. 8 pages ?6

      A406A ADCOCK and SHIPLEY (By Ryder) "Universal Machine Tool": Two Sales and Technical Specification Catalogues showing the smaller and larger machines. 12 pages ?6

      A406B Adcock and Shipley: General Catalogue: Millers 18 pages ?0

      A406C Adcock and Shipley: full-range Catalogue: Drills 1930/39 40 pages ?0

      A406D Adcock and Shipley No.0 Miller: All types: 0C, 0A, 0A1, 0A2, 0A3, 0AD, 0C, 0C1, 0C2, 0C3, 0CD,0B, 0D, 01, 02, 03, 0B1, 0B2, 0B3, 0BD: Sales and Technical Specification Catalogue 18 pages ?0

      A406D Adcock and Shipley No.1 Miller all Types: 1, 1A, 1AD, 1AA, 1AB, 1AD, 1B, 1C, 1D, 1E, 1F, 1M, 1N, 1P, 1H, 1G, 1H, 1J, 1AGU, : Sales and Technical Specification Catalogue 12 pages ?0

      A406Ev Adcock and Shipley No.2 Millers: Plain and Swivelling Head vertical Type: 2VSB, 2VSF, 2VSE and 2VR, etc: Detailed and well-illustrated Sales and Technical Specification Catalogue Collection. 20 pages ?5

      A406Eh Adcock and Shipley No.2 Millers Horizontal Type: 2D, 2B, 2C, 2D, 2E, 2F, 2G, 2H, 2AG, Sales and Technical Specification Catalogue 8 pages ?6

      A406F Adcock and Shipley 2AGU Miller: Sales and Technical Specification Sheet 1 page ?

      A406G Adcock and Shipley Model "0" Automatic Cycle Miller: Sales and Technical Specification Sheet 1 page ?

      A406H Adcock and Shipley 3HG Miller: Sales and Technical Specification Sheet 1 page ?

      A406J Adcock and Shipley 3HG/4HG Millers: Sales and Technical Specification Sheet 1 page ?

      A406K Adcock and Shipley Model "I" Horizontal Miller: Sales and Technical Specification Sheet 1 page ?

      A406L Adcock and Shipley Model "2JR" Horizontal Miller: Sales and Technical Specification Catalogue 8 pages ?4

      A406M Adcock and Shipley Model "SV140" Radial Drilling and Tapping Machine 8 pages ?4

      A406N Adcock and Shipley Model "2VS" Swivel Head Vertical Milling machine: Sales and Technical Specification Catalogue 8 pages ?4

      A406P Adcock and Shipley Milling Machines Accessories Catalogue. 20 pages ?5

      A406D Adcock and Shipley No.1 Miller: Sales and Technical Specification Catalogue 8 pages ?4

      A450 ADEPT and "Super Adept" Lathes: A complete data pack of all known literature: 3 Sales & Technical Specification sheets together a detailed 11-page Catalogue produced by the American Distributer and 2 pages on the Adept Shaper. ?2

      A500 AGATHON (Switzerland) 175-AR, 175-AV, 175-AVL, 175 Model B Precision Grinding Machines. Sales and Technical Specification and Accessories Catalogue. 4 pages. ?2

      A550 AJAX Machine Tools. AJAX were not manufacturers but importers and distributors who badged machines as their own. Many different kinds were sold and the best publication for reference is the AJAX Main Catalogue showing: Cleveland Millers, Cleveland "A" Range, Turret Millers, Production Milling Machines, smaller hand-operated small horizontal Millers, Milling machine heads and Accessories, Slotting machines, Drilling Machines, Shaping Machines, Metal Saws, Pillar and Bench Drills, Radial Arm Drills, Work Heads. etc. 64 pages. ?5

      A550A AJAX 00 Universal Precision Milling Machine. Sales and Technical Specification Catalogue. 2 pages. ?

      A550B AJAX No. 1 Milling Machine. Sales and Technical Specification Catalogue. 4 pages. ?

      A550C AJAX AJ8, AJ8-P and AJ9 Horizontal Milling Machines (small model, hand operation. Motor drive by V-belts up the rear of the main column). Two Sales and Technical Specification Catalogues and a price list. 11 pages. ?6

      A550D AJAX AJT1-R8 Turret Milling Machine. Sales and Technical Specification Catalogue. 4 pages. ?

      A550E AJAX AJT2, AJT3 and AJT4 Milling Machine. Sales and Technical Specification Catalogue. 16 pages. ?0

      A550F AJAX AJT4 Milling Machine. detailed single-model Sales and Technical Specification Catalogue. 10 pages. ?5

      A550G AJAX "A Range" Milling Machines Models 2A, 2RH, 4A and 4RH. Sales and Technical Specification Catalogue. 4 pages. ?

      A550H AJAX AJRH.1800 and AJRH.2000 Overhead-Ram Type Milling Machines. Sales and Technical Specification Catalogue. 4 pages. ?

      A550J AJAX Bed-type milling machines Models AJBM1600, AJBM2000, AJBM2600 and AJBM3250. Sales and Technical Specification Catalogue. 8 pages. ?

      A550K AJAX AJ.1120B and AJ.1370B Universal Milling Machines. Sales and Technical Specification Catalogue. 4 pages. ?

      A550L AJAX AJ.1325R and AJ.1525R Universal Milling Machines. Sales and Technical Specification Catalogue. 4 pages. ?

      A550M AJAX No. 0, 1, 2, No. 3, No. 4, No. 4L and No. 5 Cleveland Milling Machines. Sales and Technical Specification Catalogues covering the early and late models. 28 pages. ?7

      A550N AJAX AJ340 CNC Series 2 Vertical Milling machine. Sales and Technical Specification Catalogues covering the early and late models. 6 pages. ?0

      A552 AJAX Lathes AJ.150, AJC.150, AJC165, AJ.210, AJ250, AJ.285 and AJ.400. Sales and Technical Specification Catalogues. 24 pages. ?9

      A552A AJAX AJC150 lathe. Sales and Technical Specification Catalogues. 4 pages. ?

      A608 ALBA (Elliott) 10M Shaper Sales and Technical Specification Catalogue 4 pages. ?2

      A608A ALBA (Elliott) Model 6S Shaper: Sales and Technical Specification sheet 2 pages. ?

      A608B ALBA (Elliott) Model 2S Shaper: Sales and Technical Specification sheet 2 pages. ?

      A611 ALEXANDER Master Toolmaker Universal Miller: Two Sales and Technical Specification Catalogues. 14 pages ?5

      A611A Alexander Die-Sinking and Engraving Machines. Detailed General Sales and Technical Specification Catalogue (Identical to the Deckel Models) but also contains useful operating data, charts and details of accessories and how to mount them. 25 pages ?5

      A611A Alexander 3A and 1B Die-Sinking and Engraving Machines. Detailed Sales and Technical Specification Catalogue with useful operating data, charts and details of accessories and how to mount them. 20 pages ?5

      A611A Alexander 4HB and 5HB Automatic Die-Sinking and Copy Milling. Detailed Technical Sales Specification Catalogue 20 pages ?5

      A611A Alexander 4HA, 4HB and 4HC Automatic Die-Sinking and Copy Milling. Detailed Technical Sales and Specification Catalogue 16 pages ?5

      A617 ALG 100 Universal Precision Milling Machine (Deckel Copy made in CZ by Prvomajska). Superb Sales and Technical Specification and Accessories Catalogue. 20 pages. ?5

      A660 Alfredo (Tomasi Alfredo) "Deta" Milling Machine Sales & Specification Catalogue. 4 pages. ?2

      A680 ALLANSON Precision Lathe (UK) Sales and Specification sheet. 2 pages. ?

      A770 AMERICAN WATCH TOOL COMPANY - Webster Whitcombe. Superb early 1900s 31-page All-models and Accessories Sales Catalogue. ?7 (Also, for literature about these lathes developed, look under the WADE entry - the company that took the watch tool Co.)

      A770A AMERICAN WATCH TOOL COMPANY - Webster Whitcombe and Moseley models Superb 1910 Watchmakers' Lathes Catalogue and Price list. 12 pages. ?5 (Also, for literature about these lathes developed, look under the WADE entry - the company that took the watch tool Co.)

      A780F AMES-STARK Machine Tools 1950s. A collection of catalogs and sales sheets showing the entire range of machines and accessories available during the 1940s and 1950s including the Series 400 Precision Lathe (on underdrive stand), Stark Model 2 Precision Lathe, Milling Machines, Stark Model 3 ?Precision lathe, the STARK-AMES Model EH-3, Screw machines, Stark Integral Drive Bench Lathe, various versions of underdrive stands both wood and metal, a “Precision Bench Lathe Attachments?Catalogue and details of the variable-speed drive unit by The Master Electric Co, Price Lists and two letters from the Company. 85 pages. First-class, high-resolution production. ?5


      A780X Ames Precision Machine Tools: a set of four early catalogs that cover the complete range of the first Ames models: ?5

      (1) "Bench Lathe and Fixtures" very early landscape-format Catalogue with wonderful, art-worked photographs showing the lathe, its accessories - and the Ames Milling Machine. 49 pages

      (2) Booklet "The Bench Lathe at Work" - 1925: 31 pages

      (3)Ames "Bench Lathe and Bench Millers" 1926 portrait-format Catalogue showing the lathe, its accessories - and the Ames Milling Machine. Includes a price list and a letter from the factory. 16 pages

      (4) Precision Machinery for Bench Use - 1930: Lathes and Attachments, Milling Machines and Attachments, Tapping and Drilling Machines, Filing Machines". 31 pages

       

      A780Y Ames Precision Machine Tools: a set of three later catalogs: ?7
      (1) Ames No. 3 Precision Bench lathe Sales and Technical Specification Catalogue. Also shows the Ames miller and Ames Triplex Machine - a lathe and miller combined. 16 pages.

      (2) Ames Model EH-3 variable-speed drive model on underdrive stand (also badged as a Stark No. 4) Sales and Technical Specification Catalogue. 6 pages?
      (3) Ames/Stark Lathes and Accessories Sales and Technical Specification Catalogue showing the enclosed, variable-speed drive headstock. This particular lathe is shown dual-badged as both Ames and Stark. 6 pages.

       

      A780B Ames "Triplex" No. 1 "3-in One" machine tool (by Ames, USA). Sales and Technical Specification Catalogue. 6 pages. ?6

      ?/span>A786 ANAYAK FV-1, FV-2, FV-2V and FV-1T2 Turret Milling Machines. Sales and Technical Specification Catalogue. 12 pages. ?0

      A786A ANAYAK FV-3, FV-4, FV-3T2 and FV-3U Turret Milling Machines. Sales and Technical Specification Catalogue. 12 pages. ?0

      A786B ANAYAK Vertical Milling Machines. Full-range catalogue circa 1970/80. Includes details of the: FV-1, FV-2, FV-3, FV-4, FU-205 and the ANAK-MILL-12 as well as their various sub-models. English, French, German and Italian text. 10 pages. ?0

      A786C ANAYAK Vertical machining Centres: ANAK-MATIC 2.000, ANAK-MATIC 6CNC and ANAK-MATIC 8CNC. Sales and Technical Specification Catalogue 1988. 20 pages. ?0

      A786D ANAYAK General Catalogue 1988 giving brief details of: ANAK-MATIC 6CNC, ANAK-MATIC 10CNC-4, Model.H-400, Model CNC-1080, Model.H-500 Multipallet, Model. FV-4, Model V-20, Model VH-1800 and the Model ANAK MILL-12. 4 pages. ?

      A790 AMOLCO MILLING ATTACHMENT (as used on Myford and other small lathes) and Amolco self-contained vertical miller. Sales and Technical Specification and Technical Specification Sheet. 2 pages. ?

      A822X Arboga Drills. Full Catalogue Set all types from early to the 1990s. Includes the models: E100, EB100, EB100S, E100S, E108, E135, E825, EB825, E830, EST830, ER125, ER125S, ER825, ER830 Radial, ER830 Conventional, Ganged sets EBF103S, EF104S, EF102S, B2508, BM2508, G2509, GM2508, GL2508, GL2512, B2512, BM2512, G2512, GM2512, U2508, GM830, GM3512, G3M3512, G4M3512, RM3512, RLM3512, ER1830, ER830, B/22508, B4/2508, B3M2508, G2/2508, G4/2508, G2M2508, G3M2508, G2M3512, G4M3512, A4008U(M), AR4008(L), A4008M, A3008, A2508U, B2508, B2512, BM2508, BM2512, G2508, G2512, GM2508, GM2512, G2508, G2512, GM2508, GM2512, GL2508, GL2512, GSM5012, GM5012, GSMK5012, RLM3508, RM3508 and Accessory Sheets including the Hardclipper Pate Shear and Reduction Gearboxes RVS and RV-12. 28 catalogues with 104 pages ?5

      A822 ARBOGA UM400 Miniature Miller/Driller/Slotter/Shaper/Grinder. Sales and Technical Specification Catalogue. 4 pages, ?2

      A822A ARBOGA EM825 Vertical Miller/Driller. Sales and Technical Specification Catalogue. 4 pages, ?2

      A822B ARBOGA U2508 Vertical Miller/Driller. Sales and Technical Specification Catalogue. 6 pages, ?5

      A822C ARBOGA E135, E830, EST830 Drilling Machines. Geared Head. Sales and Technical Specification Catalogue. 6 pages, ?5

      A822D ARBOGA 830 Drilling Machines. Geared Head. Sales and Technical Specification Catalogue. 2 pages, ?

      A822E ARBOGA 2508 - 2512 Drilling Machines. Geared Head. Sales and Technical Specification Catalogue. 8 pages, ?0

      A822F ARBOGA 3512 Drilling Machines. Geared Head. Sales and Technical Specification Catalogue. 6 pages, ?5

      A822G ARBOGA RLM 3508, RM3508, ER 125, ER 125S, ER825 radial Arm Drilling Machines. Sales and Technical Specification Catalogue. 4 pages, ?2

      A822H ARBOGA A3008 Drilling Machines. Sales and Technical Specification Catalogue. 4 pages, ?2

      A822J ARBOGA A4008 U(M) Column-type Drilling Machine. Sales and Technical Specification Catalogue. 4 pages, ?2

      A822K ARBOGA A4008 M Drilling Machine. Sales and Technical Specification Catalogue. 4 pages, ?2

      A822L ARBOGA AR4008 (L) Radial Arm Drilling Machine. Sales and Technical Specification Catalogue. 4 pages, ?2

      A822M ARBOGA U1 Drilling Machines. Sales and Technical Specification Sheet. 4 pages, ?2

      A822N ARBOGA E-EP-BEP Grinding Machines. Sales and Technical Specification Catalogue. 2 pages, ?2

      A822P ARBOGA E-EP-BEP Grinding Machines. Sales and Technical Specification Catalogue. 2 pages, ?2

      A822Q ARBOGA UM400 Multi-funtion machine. Sales and Technical Specification Catalogue. 16 pages, ?5

      A823 ARBOR CM-110-140 Multi-function Machine. Sales and Technical Specification Catalogue and price list. 8 pages. ?6

      ARCHDALE - a vast collection of literature is available. Please phone: 01298-871633 or e-mail your requirements to :tony@lathes.co.uk

      A824 "Archdale Machine Tools 1868 - 1948" A company history. 99 pages. ?5

      A824A ARCHDALE Drills. Full-range Catalogue circa 1914. 48 pages. ?7

      A824B ARCHDALE MILLERS. Full-range Catalogue 1914. 48 pages. ?7

      A824C ARCHDALE VERTICAL MILLERS. 24", 28", 30" and 34". Sales and Technical Specification Sheets. 40 pages. ?7

      A824D ARCHDALE HORIZONTAL MILLERS. 18", 24" and 28", Sales and Technical Specification Sheets. 36 pages. ?5

      A824E ARCHDALE No. 2 Milling Machines. Sales and Technical Specification Catalogue. 26 pages. ?5

      A824F ARCHDALE Full-range Catalogue Circa 1930s-1940s: Radial-Arm drills, Heavy-duty drills, Production drills, Multi-head drills, All-gear Drills, Sensitive Universal Adjustable Multi-spindle Drills, Medium and Heavy-duty Type Universal Multi-spindle Drills, Hydraulic Multi spindle drills, 6-spindle cylinder boring machine, 4-spindle Fixed centre Hydraulic Cylinder Boring Machine, 74-spindle Vertical Hydraulic Drill, Automatic Cam Feed Unit Drilling Machines, Duplex Hydraulic Piston Drilling and Reaming Machines, 18-inch, 20-inch, 28-inch, horizontal Milling Machines, 24-inch Automatic production Milling Machine, 36-inch, 48-inch and 54-inch Duplex Automatic Manufacturing Milling Machines, 18-inch, 24-inch and 30-inch Vertical Millers, Automatic Horizontal Cam and Profile Milling Machine, Motor Driven Thread Milling Machine, etc. 65 pages. ?5

      A824G ARCHDALE Comprehensive, beautifully-illustrated full-range Catalogue Circa late 1940s showing milling machines and drills. 152 pages. ?5

      A824H ARCHDALE Full-range Catalogue 1952: 55 pages - contents much as above. ?5

      ARISTOS IMAMI Turret lathes. Sales, Specification, and Accessories Catalogue with price lists. 4 catalogue pages and 7 pages of prices.. ?6

      A826 ARMOR (USA) Universal Turret Milling Machine Sales and Technical Specification Catalogue. 6 pages. ?5

      A825 ARNO and NOMO Milling Machines. catalogue collection covering the "Dial Type" Model 0, M1, V.1, 1A, 1AR, 2R, 1VR, 1V, 2V, 3V, The HD models in sizes No. 2, No. 3 and No.4, the powered overarms and all the other many accessories. 68 pages. ?9

      A828 ARUNDEL. Compendium of all known data including Sales and Specification Catalogues for the Models K, K450, K450HD, K600, M230, M300, J3, J4, E5 (a complete 6-page catalogue), E5R, A Test Review of the M230 lathe and details of other equipment factored by the company.54 pages. ?0.

      A830 ASEA (Sweden) Jig Borers Types SJ and SJB. Sales and Technical Specification Catalogue 12 pages. ?0

      A832 ASQUITH OD1 and OD Radial-arm Drills: Technical Sales and Technical Specification Catalogue.24 pages. ?5

      A832A/MA185F ASQUITH POWER THRUST RADIAL DRILLING MACHINE: Not a Manual but a very comprehensive and useful Technical Sales and Technical Specification Catalogue with descriptions of the mechanisms, some sectional drawings and annotated control charts. ?5

      A832B ASQUITH DRILLS Catalogue. Vast range of drills from Workshop to Titanic. Beautiful factory illustrations as well. 136 pages. ?5

      A832C ASQUITH DRILLING and TAPPING UNITS: Sales and Technical Specification Catalogue. 17 pages. ?5

      ASTRA - these were imported machines branded by Scot Urquhar for the British market. We have a large collection of all types. If yours is not shown below, please enquire.

      A834 ASTRA Milling Machines: Models: F1, F2, L1, L2, L4, "Plain Miller" (horizontal), Type "0" and Type CM-60. Sales and Specification Catalogues covering the complete range. 22 pages. ?5

      A834A ASTRA Slotting machines 6-inch, 8-inch and Models 90, 110, 240 and 360. Sales and Specification Catalogues. 12 pages. ?2

      A838 ATLANTIC (USA) Milling Machine. Sales and Technical Specification Catalogue 3 pages. ?

      A840 ATLAS (USA) Lathes Catalogue No. 5 (very early - 1932) showing the new 9-inch "all-belt" drive lathe and accessories. 11 pages. ?5

      A840A ATLAS Lathes full-range Catalogue No. 8 (1934) including the 9-inch "all-belt" drive lathes, the first of the later 10-inch models with backgear, the cheaper "Unit Plan" lathes, the first wood-turning lathes, the company's drills, presses and pictures inside the factory. 32 pages. ?5

      A840B ATLAS Lathes full-range Catalogue No. 15 (circa 1936) with metal and wood-turning lathes including the later 9-inch "all-belt" drive machines, the Model 918 "Utility" Model, the revised 10-inch Model, "Unit Plan" versions, accessories, wood-turning lathes, drills, presses and motors. 44 pages. ?0

      A840C ATLAS Lathes full-range Catalogue No. 26 (dated 1936/1937). The first of the comprehensive Atlas catalogs illustrating the last 9-inch "all-belt" drive lathes together with the Utility versions; 10-inch screwcutting Models and the cheaper Unit Plan versions; wood-turning lathes; drills, presses, vices, motors and accessories. 52 pages. ?7

      A840D ATLAS Lathes full-range Catalogue No. 28 (November 1937) with lathes, millers, shapers, drills, etc.: 52 pages. ?7

      A840E ATLAS Lathes full-range Catalogue No. 31 (circa 1938) with lathes, millers, shapers, drills, presses, vices, motors and accessories. 70 pages. ?5

      A840F ATLAS Lathes full-range Catalogue No. 39 (January 1939) with millers, shapers, drills: 70 pages ?5

      A840G ATLAS Lathes full-range Catalogue No. 40 (1940) with millers, shapers, drills: 70 pages ?5

      A840G2 ATLAS Lathes full-range Catalogue No. 41 (1941) with millers, shapers, drills: 64 pages. ?5

      A840H ATLAS Lathes full-range Catalogue No. 45 (1945) with millers, shapers, drills: 64 pages. ?5

      A840J ATLAS 10" Lathe Quick-change Gearbox: Special Catalogue (1947) 12 pages. ?2

      A840K ATLAS Lathes full-range Catalogue No. 50 (1950) with millers, shapers, drills: 35 pages ?5

      A840L ATLAS Lathes full-range Catalogue No. M52 (1952 to 1958) with 1954 price list and millers, shapers, drills: ?7

      A840M ATLAS Lathes Catalogue No. 3990 with the 12" and 6" New Model Lathes (1959). 16 pages. ?5

      A840N ATLAS Lathes Catalogue No. 5993-1 with the 6" and 12" New Model lathes having the changed apron control; circa 1967: 16 pages. ?5

      A840P ATLAS Lathes Catalogue No. 300 12" New Model lathe having the changed apron control. 6 pages. ?0

      A841 Atlas 6-inch Lathe. Special Catalogue 1938 -1970 model. 8 pages. ?2

      A841A Atlas 6-inch Lathe. Mk. 2 1970s "Squared" design model. Special Catalogue. 10 pages. ?2

      A843 Atlas Metal-cutting Equipment Catalogue No. 6993-2 of 1974 with lathes and saws. 10 pages. ?2

      A844 Atlas 8" and 10" Tilt-arbor Bench Saws Catalogue No. 8-10S (circa 1950s) 8 pages. ?2

      A845 Atlas Woodworking Machines Catalogue SH54 circa 1954 with saw benches, bandsaws, jig saws, drills, grinders, wood lathe. 4 pages. ?

      A846 Atlas Bandsaw Catalogue with speed-reducer details. 2 pages. ?

      A847 Atlas Shaper Catalogue No. 30. 1st edition, 1938. Lovely illustrations. Includes the shaper pages extracted from later Catalogues as well. 8 pages. ?2

      A848 Atlas Milling Machine Catalogues. Consists of extracts from the General Catalogues showing all versions of the miller, detailed specifications, the extensive accessory range, accurate descriptions of the construction, parts, controls and optional extras. 20 pages. ?0

      A849 Atlas Wood-lathes Catalogue 8 pages ?2

      A925 ATLAS Engineering Company (London, England). Full-range catalogue of heavy machine tools: Boring, Rotary Planing, Transportable Planing, Millers, Boring Bars, Oil Country and Pipe Lathes, Centre (Engine) Lathes, Surfacing and Boring Lathes, Large Drum Turning Lathes, High-speed Break Lathes, Sliding Bed Lathes, Straightening and Forcing Presses, Bar Straightening and Reeling Machines, etc. 16 pages. ?5

      A950 AUTOMATIC (The Automatic Machine Co. Bridgeport USA) Auto. Threading Lathes. 20 pages. ?5

      A960 AVIA FNC-25 Precision Universal Milling Machine. Sales and Technical Specification Catalogue. 16 pages. ?0

      A960A AVIA FND-32 Precision Universal Milling Machine. Sales and Technical Specification Catalogue. 16 pages. ?0

      A960B AVIA FNC25, FND-25 and FND-32 Precision Universal Milling Machines. Sales and Technical Specification Catalogue. 6 pages. ?2

      A960C AVIA FNF40, FNF-40CNC and FNF-50CNC. Precision Universal Milling Machines. Sales and Technical Specification Catalogue. 2 pages. ?

      A964 AZETA FU-1 Milling Machine. Two slightly different Sales and Technical Specification Catalogues. English, French, German and Italian text. 8 pages. ?5

      B1 BABY GRAND: Tiny Sales and Technical Specification Catalogue for US hobby lathe. 4 pages. ?

      B3 BALDING Beaver 9" swing Lathe: Sales and Technical Specification sheet. 2 pages. ?

      B5 BALDWIN (N.H.Baldwin U.S.A.): Foot Lathes and other machine tools. Catalog circa 1880 showing "Improved Portable Foot Lathes". 66 pages. ?5

      B7 BANDINI FA1/CB Universal Milling Machine (Deckel clone). Sales and Technical Specification Catalogue. 2 pages. ?

      B7B BARBERO Drlling Machines Bench and Pillar (Taladradoras de Columna de Bancada - made in Argentina). Models BB 42/50, CB 25.32, ABE 28/32, CBE 28/32, ARB-20 and AS-16. Sales and Technical Specification Catalogue. 6 pages. ?8

      B8 BARBER COLEMAN (Barber-Coleman) General Sales Catalogue: Lathes, Hobbing machines, Hob Sharpening Machines. 8 pages. ?6

      B8A BARBER COLEMAN 1610T Toolroom Lathes Sales and Technical Specification Catalogue. 16 pages ?0

      BARBER-MEUSER see under Meuser

      B10 BARDONS and OLIVER No. 3 Universal and plain Turret Lathes. Sales and Technical Specification Catalogue 8 pages ?5

      B12 BARDONS and OLIVER No. 2 Geared Electric Turret lathe. Sales and Technical Specification Catalogue 6 pages ?5

      B14 BARNES (USA) Lathes Catalogue for 1921 showing the full range with photographs and engravings. Models: No. 41/2, No. 5, No. 13, 13 and 18-inch Engine Lathes and Accessories. 31 pages ?5

      B14A Barnes Lathes Catalogue for 1918 showing the full range with photographs and engravings. 32 pages. ?5

      B15 BCA Miniature Jig Borer/Jig Driller. A complete data pack consisting of UK Sales and Technical Specification Catalogues for the Mk.2 and Mk.3 versions (8 pages) together with a 2-page LEINEN Model BFL Catalogue (the original machine) and a 2-page sheet for the other earlier version, the EXCEL Model"0" Sales and Technical Specification Sheet. ?4

      B20 BEAVER (England) Model A Turret Miller (round ram machine with 6-inch wide table). Sales and Technical Specification Catalogue with spindle cross-section. 4 pages. ?2 US?0

      B20-VBA BEAVER VBA Vertical Miller (round ram machine with10-inch wide table) Sales and Technical Specification Catalogue. 4 pages. ?2

      B20A BEAVER (England) VBRP Mk. 1 Turret Miller: Comprehensive Sales and Technical Specification Catalogue. 22 pages ?5

      B20B BEAVER (England) VBRP Mk. 2 Turret Miller: Detailed Sales and Technical Specification Catalogue. 32 pages ?5

      B20C BEAVER (England) VBRP Mk. 2M Turret Miller: Last version of the VBRP with different options list. 4 pages ?

      B20D BEAVER (England) "PAL" Turret Miller - the smallest beaver in the Company's range. Shows the 16-speed belt-change and variable-speed versions. 4 pages. ?

      B20Z BEAVER Mk. 4 Turret Miller. Sales and Technical Specification Catalogue. 4 pages. ?

      B20E BEAVER (England) Mk. 5 VBRP. Sales and Technical Specification Catalogue. 4 pages. ?

      B20F BEAVER (England) COPYING MILLERS. Shows the Synchro-Trace. 180-Super, Electro-Profile, Mk.2 Copy Mill and the rare Mk. 4 Copy Mill with motorised universal angular milling head. Sales and Technical Specification Catalogue. 4 pages. ?

      B20G BEAVER (England) "CRUSADER 5" and "Crusader 5-ATC" CNC Millers. Sales and Technical Specification Catalogue. 4 pages. ?

      B20H BEAVER (England) NC5 Numerically Controlled Milling Machine. Technical Sales and Technical Specification Catalogue. 14 pages. ?0

      B20J BEAVER (England) NC15, NC25 and NC35 Vertical Machining Centres. Technical Sales Specification Catalogue. 8 pages. ?2

      B20K BEAVER (England) NC560-15 (YANG NC560-15) Computer-controlled lathe. Sales and Technical Specification Catalogue. 8 pages. ?2

      B20L BEAVER (England) CNC Machine Tools: NC15, NC5-ACT, NC5-S, NC5, "Galaxy", "Vega", CK-2, 560-15: Sales and Technical Specification Catalogue. 6 pages. ?2

      B20M BEAVER (England) TC20 Turning Centre. Sales and Technical Specification Sheet. 2 pages. ?

      B22 BECHLER Wonderful 1951 Colour Catalogue with a history of Andre Bechler Machine Tools and technical details showing how the Automatic Lathe was developed and how it operates. Factory photographs showing production process and installations of Bechler lathes in watch factories. 34-pages. B and W reproduction ?7. Colour reproduction ?5.

      B22A BECHLER General Catalogue of Automatic lathes and Accessories. Includes a description of how they work, the jobs they can undertake, employment of accessories. Models covered include: AS, AR, BR, CR and Multibar loader. 20 pages. ?7

      B22B BECHLER Model AR Automatic Lathes. Sales and Technical Specification and Attachments Catalogue. 24 pages. ?7

      B22C BECHLER Automatic Lathes MS-7, MTG-7, NA-12, R-10. Sales and Technical Specification Catalogue. 8 pages. ?5

      B22D BECHLER Automatic Lathes Isomatic, Type A, Type B, Type C, Type Ar, Type BR, Type CR, Sales and Technical Specification Catalogue 1958. 20 pages. ?5

      B22E BECHLER Model BR Automatic Lathes. Technical Sales and Technical Specification and Attachments Catalogues. 20 pages. ?7

      B22F BECHLER CNC Lathe TBM-26. Sales and Technical Specification Catalogue. 6 pages. ?5

      B22G BECHLER CNC Lathe TOP-100. Sales and Technical Specification Catalogue. 6 pages. ?5

      B22H BECHLER CNC Lathe ELECTOR 16. Sales and Technical Specification Catalogue. 6 pages. ?5

      B22J BECHLER Cam Cutting Machine Type CF. Sales and Technical Specification Catalogue. 8 pages. ?5

      B22K BECHLER Automatic Bar Loader "Multibar". Sales and Technical Specification Catalogue. 8 pages. ?5

      B23 BEICHLE Universal Tool Milling Machine. Sales and Technical Specification Catalogue. 10 pages. ?5

      B25 BENCHMASTER (USA) Milling Machines and Presses. Full-range Sales and Technical Specification Catalogue + Sales and Technical Specification Sheets plus a 2-page Parts Manual. 15 pages. ?5

      B30 BENSON Precision Bench Lathes (England): Sales and Technical Specification Catalogue. 16 pages. ?0

      B35 BERCO Con-rod Boring and Grinding machine ARB-500. Detailed Sales & Specification Catalogue, With annotated drawings and a clear description this publication has enough detail to act as a simple instruction manual. 8 pages. ?5

      B40 BERGEON Watch and Instrument maker's Lathes: full Catalogue, 1950s. 40 pages. ?5

      B45 BERGSTRON Quick-Change Toolposts. Sales & Technical Specification Catalogue. 6 pages ?5

      B50 BERLIN Lathe (Harald Friedrich and Sonne) Sales and Technical Specification Catalogue. 11 pages. ?0

      B59 BERRY 8-inch lathe. Sales and Technical Specification Catalogue. 4 pages. ?

      B60 BERTSCHY Shapers: Sales and Technical Specification Catalogue 4 pages ?2

      B65 BESWICK Lathe. Sales and Technical Specification Sheet. 2 pages. ?0

      B67 BILCIA Precision Lathes, two Catalogues bound as one: 1) Types 20 and 25: Sales, Technical Specification and Accessories, 10 pages in English. 2) Types M4 and M6, Technical Specification and Accessories, 4 pages in Spanish. ?5

      B70 Binns and Berry Type JB 10.5-inch centre height lathe: Sales and Technical Specification Catalogue. Includes reproductions of the (frequently damaged) screwcutting and spindle-speed charts. 10 pages. ?0

      B70A Binns and Berry Type TB 25" swing Lathe Mk 1: Sales and Technical Specification Catalogue. 8 pages. ?5

      B70B Binns and Berry Type SAR 18" swing Lathe: Sales and Technical Specification Catalogue. 4 pages. ?

      B70C Binns and Berry Type TB 25" swing Lathe Mk 3: Sales and Technical Specification Catalogue. 8 pages. ?5

      B70D Binns and Berry Type SB Lathe (Headstock unit and floor plinth - factory code "TG" for Tangram lathe): Sales and Technical Specification Catalogue. 17 pages. ?5

      B70E Binns and Berry Type ME 8.5" centre height Lathe: Sales and Technical Specification Catalogue. 4 pages. ?

      B70F Binns and Berry Type "Light" 23" swing Lathe: Sales and Technical Specification Catalogue. 3 pages. ?

      B70G Binns and Berry GEMINI AND "GEMINIS" lathes (Spanish built) Series 1200, Series 1800, GE1200, GE1200S, GE970, GE850, GE650 GE500 (etc). Sales and Technical Specification Catalogues. 32 pages. ?7

      B70J Binns and Berry TRIDENT LATHES. Sales and Technical Specification Catalogue. 10 pages. ?5

      B70K Binns and Berry DATA-90 LATHE. Sales and Technical Specification Catalogue. 8 pages. ?5

      B70L Binns and Berry "London" 11.5-inch centre height. Sales and Technical Specification Catalogue. 8 pages. ?5

      B70M Binns and Berry - older lathes. 6.5 to 12.5-inch centre height. Sales and Technical Specification Catalogue. 12 pages. ?5

      B70N Binns and Berry Shaper - 16-inch stroke. Sales and Technical Specification Catalogue. 4 pages. ?

      B73 BLANCHARD NO. 16 Vertical Surface Grinder. Comprehensive Technical sales Catalogue. ?5

      B74 Blohm HFS Range of Surface Grinders. Detailed Sales, Technical Specification and Accessories Catalogue. 56 pages ?0

      B74A Blohm SIMPLEX range of Surface Grinders. Detailed Sales, Technical Specification and Accessories Catalogue. 34 pages ?9
      B74B Blohm HFS 204 Surface Grinder. Detailed Sales, Techical Specification and Accessories Catalogue. 32 pages ?9

      B74C Blohm 204 Surface Grinder. Detailed Sales, Technical Specification and Accessories Catalogue. 28 pages ?9

      B75 BLOUNT Lathes and Grinders. Sales and Technical Specification Catalogue.12 pages. ?2

      BOEHRINGER - see also under VDF

      B77 BOEHRINGER Turret Lathes Sales and Technical Specification Catalogue. 20 pages. ?5

      B150 BOKO (Bohner & Kohle) Catalogue Collection covering the miller Types: Fo, F1, F2, F2V, WF2, F3, F30, F30.1o and a detailed 30-page catalogue showing examples of work performed on BOKO millers. 97 pages. ?5

      G. BOLEY - see also the LEINEN section for Catalogues showing similar "Boley-Leinen" lathes.

      G. BOLEY made a large range of lathes. If you can't see yours here please e-mail a picture to: tony@lathes.co.uk


      B210 BOLEY Accessories and Parts For Lathes. Covers the full range of accessories made for the Types: 2-HME, 4LV, 5LZ, Mechanics Lathes Sizes 2 and 3 and Second Operation Lathes 4H, 4E, 4-HR, 4-HK, 4-PS. A vast range of extras, comprehensively illustrated. 68 pages ?5

      B210A BOLEY Attachments and Accessories Catalogue for the larger (not watchmakers') lathes. This publication shows the full range of ordinary and extra-ordinary accessories available from the early 1920 to the mid 1940s. 20 pages. ?0

      B210B Accessories for Boley Lathes: sizes 2, 3, 4 and Boley "Mechanics" Lathe and Short-bed and Precision Model 4L. 28 pages. ?0

      B210C BOLEY Stands, Countershafts, Foot Treadle and Independent drives for Plain-turning and Screwcutting Lathes. 10 pages. ?5

      B211A BOLEY Miniature Precision Lathes: full-range catalogue (1983) small format. Shows the last range of Boley lathes made. 12 pages. ?5

      B211B BOLEY Miniature Precision Lathes: full-range Catalogue (1983) small format. Shows the last range of Boley lathes made including the 1HME, 2HME, F1, DW4, RD, 6LZ, 4E, 4PS, BDA-H, 4H, BKN-100, BDN-160, VG16 Multi-spindle drill, BE2 Bench Drill and the Boley Vice. 12 pages. ?5

      B211B-F Boley F1 Super-precision Watchmakers' Lathe. Not a manual but a very detailed and informative Sales Catalogue that explains clearly how to use the lathe for the specialised work of which it was capable. 4 pages. ?2

      B211C Boley Lathes Sales Folder showing the entire lathe range as it was in the 1970s. Models shown include the Miniature Precision Sizes 1 and 2, the larger plain-turning and screwcutting Models 4E, 4H, 4PS, 4LV, 5LZDW4, RD25 and RD42. 8 pages. ?5

      B211D Boley Sales Folder showing the entire lathe range as it was in the 1950s and 1960s. "Miniature Precision" models 1, 2, 3, 4. Screwcutting models : 4L, 4P and 4H. Super Precision model: DW4; Turret model: REV 25 and Drills. 6 pages. ?5

      B211E Boley Lathes: 1A, 1B, 1BH, 1HM, 1HME and Sizes 1, 2, 3 and 4 lathes. Detailed catalogue of Boley lathes made from the 1930s to the 1960s. Includes Watchmakers' Lathes, Precision Plain-turning and Production Lathes, Bench Lathes, Backgeared and Screwcutting Lathes. 20 pages. ?0

      B211F BOLEY WATCHMAKERS' LATHES: Complete-range catalogue circa 1924 - covering items many of which were made from the late 1800s until the 1960s. Shows not just the lathes and their accessories but vertical and horizontal milling machines, drilling machines in light and heavy types, anvils, cases, countershafts and drive systems, files, foot motors, gauges, hammers, hand tools, micrometers, sliding verniers Gauges, stakes, drifts, punches, screwdrivers, spring winders, tweezers, vices and even work-bench stools, etc. A superb production, which illustrates to perfection the enormous variety of Boley products. 86 pages. ?5

      B211J Boley "Small Precision Lathes" Sales Folder Models 1A, 1B, 1HM, 1HME 6 pages ?5

      B211K BOLEY Precision Lathes (other than watchmakers' lathes): Three wonderful full-range catalogues from the 1920s and 1930 that show the complete range of plain-turning and screwcutting lathes as manufactured from the early 1920s until the mid 1940s. Includes a very rare UK price list. two catalogues are for the lathes, the third is a special Accessories Publication. 80 pages ?5

      B211L Boley Mechanic's Lathe "Size 2" Models 2-BE and 2-HME: Sales folder 6 pages ?5

      B211M Boley "Mechanic's" Precision Lathe Size 3: Sales Folder. 6 pages ?5

      B211N Boley Size 4 Lathes. Comprehensive Catalogue showing in details the Types 4H, 4E, 4HR, 4HRA and 4HK. Illustrated all the different combinations of headstock, slide rests, tailstocks, slide rest. drive systems, stands, automation systems, thread chasing, etc. 38 pages. ?5

      B211P Boley Precision "Mechanics" Lathes Type L: Sales folder (1930s machines) 4 pages ?2

      B211Q Boley Precision Lathes Models 1A, 1B, 1AM, 1BM, 1AH, 1BH, 2A, 2B, 3B, 3C, 4B, 4C, 3CR, 4BR, 2BJ, 3BJ, 4BJ, 3L, 4L, 2H, 3H, 4H, 3HK, 3HL, 3HM, 2HN, 2HK, 3HK, 4HK, 2HL, 3HL, 4HL, 2HM, 3HM, 4HM, PA, PS, PP, PQ, Type G and Accessories and Drive Systems. Catalogue No. 271 showing lathes as made from the 1920s to the 1930s. 34 pages ?7

      B211S Boley 4L (late model backgeared and screwcutting on a distinctive self-contained stand with central storage drawers). Detailed and well-illustrated Sales Catalogue. GERMAN TEXT. 8 pages ?5

      B211T BOLEY 5LZ High-precision Screwcutting Lathe. Detailed Technical Sales Catalogue with control and operation explanations. 26 pages. ?7

      B211U Boley Micro-finish, High-precision Lathe DW4. Sales Catalogue 4 pages ?2

      B211V Boley Turret lathes REV 16, 25 and 42: Sales folder 4 pages ?2

      B211W Boley Turret lathe REV 10: Sales Folder 4 pages ?2

      B211X Boley Turret Lathes 1920s and 1930s: Sales and Accessories Catalogue. 11 pages. ?5

      B211Y Boley Universal Precision Milling Machine: Sales Folder (1929) 4 pages. ?2

      B211Z Boley RD 25 "Vertical Turret" production lathe. 16 pages ?5

       

      B211Z2 Boley "Precision Machine Tools" - a 6-page Sales and Specification Folder showing the miniature precision lathe Size 1, Mechanics Lathe Sizes 2, 3 and 4, High-precision screwcutting lathe 5LZ, Lathe Type DW4, Lathes Types REV25 and REV42, Bench-mounted Sensitive Drill BE2, Multi-spindle Drills and tapping machines VBef13 and VGe10. ?5

      B212H ALL the ABOVE Boley Literature as a very high quality reproduction. ?85

      Boley and Leinen - this was an entirely separate company to G.Boley

      B210B BOLEY and LEINEN (Boley and Leinen was a Leinen-owned Company) Precision Watch Lathes and Tools: Catalogue No.516E Contains beautifully illustrated details of "Reform" Lathes, and Accessories (Individual and Boxed Sets) Countershafts and Drive Systems, Bench Vices, Staking Tools etc. 16 pages. ?5

      B210C Boley and Leinen Precision Watch Lathes and Tools: catalogue Cat. No. 5111E As above catalogue B171 but an earlier edition with a slightly different range of models. 12 pages. ?5

      L210D BOLEY and LEINEN: Wonderful Complete range catalogue showing the watchmakers' and larger lathes and accessories as manufactured during the 1920s and 1930s. 32 pages ?5

      B215 BOLEY and LEINEN Precision Watch Lathes and Tools: Catalogue No.516E Contains beautifully illustrated details of "Reform" Lathes, and Accessories (Individual and Boxed Sets) Countershafts and Drive Systems, Bench Vices, Staking Tools etc. 16 pages ?5

      B215A Boley and Leinen Precision Watch Lathes and Tools: Catalogue Cat. No. 5111E As above Catalogue B171 but an earlier edition with a slightly different range of models. 12 pages. ?5

      Both Boley and Leinen Catalogues above: ?0

      L215C BOLEY and LEINEN: Wonderful Complete range Catalogue showing the watchmakers' and larger lathes and accessories as manufactured during the 1920s and 1930s. 32 pages. ?5

      B220/L800 Bolla Eligio Mario LUX No. 2 Milling Machine. Sales and Technical Specification and Accessories Catalogue. 12 pages. ?0


      B230 Bottequin & Blanchaert Shapers BB450 and BB600 (Etau-Limeur). Sales & Technical Specification Catalogue in French with English Translations. 10 pages. ?0

      B244ALL BOXFORD Machine Tools: a Special Catalogue Data Pack of all products that shows the conventional machine tools made by the Company. Spans from the very early 1940s 3-inch Precision Lathes and Rear-drive models to the later Underdrive types and the final Geared-head versions. Technical specifications, illustrations of machines and accessories including: precision lathes large and small, the rear drive T, C, B, A, CSB and ME10, Underdrive lathes TUD, CUD, BUD, AUD and VSL, Conventional rear driven lathes the C, B and A lathes, the later geared headsTR.11.30, 330IS, 280T models, Tool and Cutter Grinder, a special brochure on the lathe milling and indexing slides Little Giant Toolpost Grinder, three Bench and Floor-standing drill catalogues, Measuring and Inspection equipment, VM30 Vertical Miller and three catalogues for the S200 8-inch Shaper, etc 140 pages. 140 pages. ?5

      B244DR BOXFORD Drills 9also Branded UNION)- all types, bench and pillar and accessories. Three Sales and Technical Specifcation Catalogues. 12 pages ?5

      B240 Boxford (Denford) Precision 3-inch Bench Lathe and Bench Capstan Lathe. Sales and Technical Specification Sheets circa 1945/6. 4 pages including a price and specification list and advance information for the 4.5-inch lathes. ?

      B240AA BOXFORD 4.5" Precision Plain-turning lathe. Sales and Technical Specification Catalogue. 6 pages. ?2

      B244 BOXFORD Lathes and Accessories: Catalogue Early 1950s covering all the 4.5-inch rear-drive models. 26 pages ?6

      B244A Boxford Accessories: Sales and Technical Specification Sheets showing the full range of accessories. (1965) 12 pages. ?2

      B244B Boxford Lathes AUD, BUD, CUD early Underdrive Types in Mk. 1 form. Sales and Technical Specification and Accessories Catalogue. 4 pages ?

      B244C Boxford lathes AUD, BUD, CUD and VSL later Underdrive Mk. 1 Types. Sales and Technical Specification and Accessories Sheets 7 pages. ?2

      B244D Boxford Lathes AUD, BUD, CUD MK. 2 Underdrive Type: Sales and Technical Specification and Accessories Sheets 8 pages. ?2

      B244F BOXFORD TUD Training Lathe Sales and Technical Specification Sheet. 2 pages. ?

      B244G BOXFORD ME10 Lathe Sales and Technical Specification Sheet. 2 pages. ?

      B244H BOXFORD CSB Lathe Sales and Technical Specification Sheet. 2 pages. ?

      B244J BOXFORD VSL Lathe Sales and Technical Specification Sheet (variable-speed drive Mk. 1 with screwed spindle nose). 2 pages. ?

      B244K BOXFORD VSL/L00 Lathe Sales and Technical Specification Sheet (variable-speed drive Mk. 2 with long-nose taper spindle). 4 pages. ?

      B244L BOXFORD G.200 Tool and Cutter Grinder. Sales and Technical Specification and Accessories catalogue. 4 pages. ?

      B244M Boxford VM30 Vertical Miller: Sales and Technical Specification Catalogue. 5 pages ?2

      B244MM Boxford "Milling with the Boxford Lathe": Sales and Technical Specification Catalogue showing the tall-type milling attachment being used on a variety of jobs. 6 pages ?2

      B244SHP Boxford Shaper. All four Sales and Technical Specification Catalogues issued: Edition 1: 8-inch High-speed shaper (2 pages). Edition 2 : 8-inch High-speed shaper (2 pages). Edition 3: Model 200 Shaper 2-pages. Edition 4: Model S200. Also included two price lists. 10 pages in total. ?2

      B245 Later Conventional (not computer controlled) Boxford Lathes: A complete package of information for the: T, TR, STS, TS, TF, TH, produced in 10-inch and 11-inch versions with models types: 10.20, 10.30, 11.30, 280, 330 and sub-variants. All models from plain-turning to Toolroom types. 33 pages. ?5 .

      B262A Boxford ACL (Advanced Computer lathe) Sales and technical Specification catalogue. 4 pages. ?

      B262B Boxford DUET Dual-purpose CNC Training machine. Sales and Technical Specification Catalogue. 2 pages. ?

      B262C BOXFORD MT2 Combined Lathe and Miller. Sales and Technical Specification Catalogue.2 pages. ?

      B262D BOXFORD A3HSRi Router with PC Control. Sales and Technical Specification Catalogue.2 pages. ?

      B262E Boxford 125 TCL Sales and Technical Specification Catalogue 2 pages ?

      B262F Boxford 160TCL Machining Centre. Sales and Technical Specification Catalogue. 4 pages. ?2

      B262G Boxford 165HMC Horizontal Machining Centre. Sales and Technical Specification Catalogue with Price List and Software options 4 pages. ?2

      B262H Boxford 190VMC Vertical machining centre. Sales and Technical Specification Catalogue 4 pages. ?2

      B262J Boxford 190VMCxi Vertical machining centre. Sales and Technical Specification Catalogue 2 pages. ?

      B262K BOXFORD T220 CNC Lathe. Sales and Technical Specification Catalogue.2 pages. ?

      B262L BOXFORD 240TCL CNC Lathe. Sales and Technical Specification Catalogue.2 pages. ?

      B262M BOXFORD 240F Fanuc CNC Lathe. Sales and Technical Specification Catalogue.2 pages. ?

      B262N Boxford 250PC Slant-bed Computer lathe. Sales and Technical Specification Catalogue. 6 pages ?2

      B262P Boxford 260 VMC Vertical Machining Centre 2 pages ?

      B262Q Boxford 280 Turnmaster CNC 4 pages. ?

      B262R Boxford 280 TCL (Computer Training Lathe) 2 pages. ?

      B262S Boxford 280 TCL (Computer Training Lathe) 2 pages. ?

      B262T Boxford 300VMC Machining Centre. Sales and Technical Specification Catalogue. 6 pages. ?2

      B262U BOXFORD MidiMill Vertical Machining Centre. Sales and Technical Specification Catalogue.2 pages. ?

      B262V Boxford 240F Fanuc Training Lathe. Sales and Technical Specification Catalogue. 2 pages. ?

      B262W Boxford "Little Giant" Toolpost Grinder. Sales and Specification Sheet. 2 pages. ?

      B262X Boxford (Denford) Machine-tool Accessories: Comparator Gauges, 20-inch Sine Centres, Sine Tables, Universal Stand, Double column Stand, Precision Parallels and Precision Straight Edges. Sales and Specification Catalogues. 7 pages. ?2

      B365 Boyar-Schultz Model 6.12 Surface Grinder: Sales and Technical Specification Catalogue. 6 pages ?2

      B370 BOYE and EMMES (USA) Machine Tool Co. "Schumacher and Boye" Lathes: 19-page Sales and Technical Specification Catalogue circa 1912 showing the full range of lathes made from around 1900 to 1920. ?5

      B370A BOYE and EMMES (USA) Lathes: 14-page Sales and Technical Specification Catalogue circa 1926 showing the range of geared-head lathes as made from around 1920 to 1930 and later. Also included (additional to the 14 pages) is correspondence from the factory to a customer. ?8

      B370B Boye and Emmes 14-inch Series AB lathe (1955): Sales and Technical Specification Catalogue. 4 pages ?2

      B370C Boye and Emmes Engine lathes: Size 2013 (16-inch) Series BB2 Sales and Technical Specification Catalogue. 4 pages. ?2

      B370D Boye and Emmes Engine lathes: 20-inch Series CB: Sales and Technical Specification Catalogue. 4 pages. ?2

      B370E Boye and Emmes Engine lathe 2516 Series CB2: Sales and Technical Specification Catalogue. 4 pages. ?2

      B370F Boye and Emmes Engine lathe: Dual-Spindle Model Sales and Technical Specification Catalogue. 6 pages. ?6

      B370G Boye and Emmes Engine lathe: Model A 16-inch Heavy Duty (headstock tapers from outer face to chuck end). Sales and Technical Specification Catalogue. 4 pages. ?2

      B400 BRADFORD very early and rare circa 1900 full-range Catalogue with wonderful illustrations and detailed descriptions showing the lathes, front and rear views of sub-assemblies and accessories as they were from around 1895 to 1920 68 pages ?5

      B401 BRADFORD Metalmaster (geared-head) Lathe Sales and Technical Specification Catalogue 1940 edition with double-page spread picture. Includes 1941 Sales and Technical Specification sheet. 10 pages ?0

      B402 BRADFORD Metalmaster (geared-head) Lathe Sales and Technical Specification Catalogue - early edition dated 1941. 8 pages ?5

      B403 BRADFORD Metalmaster (geared-head) Lathe Detailed Sales and Technical Specification Catalogue - later edition dated 1946 showing the lathe as it was in the 1950s. 8 pages. ?5

      B404 BRADFORD General Catalogue with Lathe, Grinders and Buffers 32 pages. ?5

      B450 Breda Lathes: Catalogues for the: BRF150, BRM180, BRL 225, BRL 250, BRF 250 and BRM F250. 22 pages. ?0

      B450A BREDA 30th Anniversary Range Brochure. Lathes Models; BRF150, BRM180, BRL225, BRL250, BRP250, BRP300. radial-arm drills Models: R915L, R1200L, R1220MP, R1580MP, R1880MP, Twist Drill Grinders AFP30, AFP50 AFP80. Plus interesting pages on the factory background and history. 16 pages. ?7

      B450B BREDA Radial-arm Drills Series MS and MP - all sizes. Sales and Technical Specification Catalogue. 12 pages. ?5

      B450C BREDA Twist-Drill Grinding Machines AFP30, AFP50 and AFP80. Sales and Technical Specification Catalogue. 6 pages. ?2

      B450D BREDA Grinding Machine AFC5. Sales and Technical Specification Catalogue. 6 pages. ?2

      B474 BRIDGEFORD (USA Betts machine Company) Heavy-duty Lathes: Whole-range Sales and Technical Specification Catalogues. 65 pages. ?7

      B575 BRIDGEPORT MILLERS. Pre-war to early 1950s "Round-ram" Sales and Technical Specification Catalogue (not a first class example but perfectly readable) together with an excellent Post WW2 4-page catalogue. 20 pages ?5

      B575A BRIDGEPORT MILLERS ATTACHMENTS Catalogue. Early Edition circa 1952 (Cat. 30). 16 pages. ?8

      B575B BRIDGEPORT MILLERS Series 1 and Series 2 Vertical Turret Millers Sales and Technical Specification Catalogue (Cat. C115) 16 pages. ?8

      B575C BRIDGEPORT MILLERS (USA) Detailed Full-range Sales and Technical Specification and Accessories Catalogue circa 1970s (Cat. BR67) 46 pages ?5

      B575D BRIDGEPORT MILLERS 1954 "Celebration of 20,000 machines" Catalogue. 4 pages ?2

      B575F Bridgeport Millers Series 1: Sales and Technical Specification Catalogue 15 pages ?2

      B575G Bridgeport Millers Series 1 BRJ and BRM and Accessories. Sales and Technical Specification Catalogue 42 pages ?5

      B575H Bridgeport Millers Series 1 (Adcock and Shipley Cat. No. 37) Full-range Sales and Technical Specification and Accessories Catalogue. This edition contains more technical and specification information than any other Bridgeport Catalogue. 42 pages ?5

      B575J Bridgeport Millers Series 1 BRJ/BR2J2 Cat. No. 208/EFg2) Sales and Technical Specification and Accessories Catalogue. 24 pages ?5

      B576 Bridgeport Millers: General Sales and Technical Specification Catalogue 1980s - CNC Vertical, Vertical and Horizontal Machining Centres, Universal Machining Centres 8 pages ?2

      B576A Bridgeport Series 1 CNC Milling Machine Sales and Technical Specification Catalogue (No. 105/E2). 18 pages. ?5

      B576B Bridgeport Series 1 CNC Machining Centre. Technical Specification Catalogue.. 4 pages. ?2

      B576C Bridgeport Series 2 with NC Control. Sales and Specification catalogue. 15 pages. ?0

      B576D Bridgeport Series 2 MDI (Manual Data Input)with NC Control. Sales and Specification catalogue. 15 pages. ?0

      B576E Bridgeport CNC Milling Machines All-models Sales and Technical Specification Catalogue: Interact Series 1 MK. 2, Interact 4 Series 2. 18 pages. ?5

      B576F Bridgeport General CNC Catalogues (two) giving short specifications of: Interact Series 1, Interact 1 Mk. 2, Interact 2, Interact 4, Interact 300, Interact 400, Interact 412, Interact 520, Interact 700, BPC 320H, BPC 380H, BPC 520V, BPC 520V-APC. 16 pages. ?0

      B576G INTERACT Mk. 2 INTERACT 4 Sales and Specification Catalogue. 12 pages. ?0

      B576H Bridgeport VMC500, VMC600, VMC800 and VMC1000. Sales and Specification Catalogues. 16 pages. ?0

      B576J Bridgeport APC600. Sales and Specification Catalogues. 8 pages. ?2

      B577 Bridgeport Surface Grinders: Sales and Technical Specification Catalogue. 14 pages. ?2

      MB118 BRITANNIA - a 234-page "Manual" published by the Britannia Company in 1899 to advertise their lathes and show how to use them in technical schools. An additional 192 page advertising section (Catalogue No. 6) is at the back of the book that shows the complete range of Britannia products for both the amateur and professional markets. A wonderful publication - and a rare find. Covers every aspect of lathe work including a useful section on ornamental turning, ornamental attachments and spinning. High-definition scan to CD ?7 or ?5 printed

      MB118A Britannia No. 7 "Engineers' Tools Etc. Catalogue" showing the full range of lathes, millers, shapers, pillar and radial-arm drills, horizontal borers, planers, parting-off machines, punching and shearing machines, screwing machines, plate flanging machines, chucks, compound slides, cutting tools, vices, saws, band saws and engineers tools. 82 pages. ?7

      B789V BROADBENT Heavy Duty Vertical Boring Mills 1970s Sales and Technical Specification Catalogue showing the Series 60, 72, 96 and 120 Models - the numbers refer to the table diameters in inches. 14 detailed pages. ?9

      B788 BROADBENT Machine Tools. Complete Range Catalogue showing the machines as produced during the 1950s and 1960s. Includes: Lathes, Horizontal Plano-milling Machines, Vertical Boring and Turning Machines and Bar Reeling Machines. 72 pages. ?5

      B788B Broadbent Machine Tools. Complete range Catalogue showing the machines of the late 1960s and 1970s: Lathes Series 2534 and 3748; Oil Country Lathes Series 121HS, 1215HS. Heavy duty Vertical Boring Mills Series 60, 72, 96 and 120. 32 pages. ?9

      B788C Broadbent L8V and L10V Lathes catalogue 5 pages, ?2

      B789 BROADBENT and SCHOFIELD "BSB" Lathes. Complete Catalogue Collection for the Types: BSB, C, BSC, BSD, BSH, BSN and BSX. 60 pages. ?5

      B789F BROADBENT and SCHOFIELD "DRUM" Lathes. Two Sales and Technical Specification Catalogues showing all the models made by the Company. 12 pages. ?0

      B789G BROADBENT and SCHOFIELD "BREAK" Lathes. Sales and Technical Specification Catalogue. 12 pages. ?5

      B789H BROADBENT and SCHOFIELD "Dual Spindle" Lathes. Sales and Technical Specification Catalogue. 6 pages. ?5

      B789J BROADBENT and SCHOFIELD Oil-Country Lathes. Sales and Technical Specification Catalogue. 4 pages. ?2

      B795 Brodrene Sundt (Norway). Sales Booklet (1948) covering their full range of lathes and a Horizontal Borer. ?9

      B797 Brook Shapers (Newey Engineering) Sales and Specification Catalogue.6 pages. ?2

      B799 Brown and Sharpe Full-range Catalogue dated 1951: Milling, Grinding and Screw machines. 40 pages ?5

      B799A Brown & Sharpe: a wonderful book of photographs and technical details of Brown & Sharpe Grinding Machines - Surface, Tool & Cutter, Face Grinding and Universal Tool & Cutter - as manufactured from the 1940s to early 1950s. Includes details of standard, modified and special machines with pictures of special fittings and accessories. A high-quality reproduction. 172 pages. ?5

      B799B Brown & Sharpe Milling Machine Catalog dated 1928 giving technical specifications and interesting and detailed constructional details of the ""Standard" range including the Models 2A, 3A, 2B, 3B. 36 pages. ?0

      B800Z BROWN and SHARPE "Construction and Use of Milling Machines". Wonderful 230-page book published in 1900 showing the company's products, accessories and work samples. High quality reproduction enlarged to A4. 230 pages. ?5

      B800A BROWN and SHARPE No. 000 Plain Milling Machine. Sales and Technical Specification Catalogue 1961 8 pages ?2

      B800B BROWN and SHARPE No.0 OMNIVERSAL Toolroom and Experimental Milling Machine. Two Sales and Technical Specification Catalogues showing early and late types. Wonderful pictures and a detailed specification of a remarkable machine tool. 28 pages. ?7

      B800C BROWN and SHARPE (USA) No. 0 Horizontal Milling Machine. Sales and Technical Specification Catalogue 1939. 4 pages. ?2

      B800D BROWN and SHARPE (USA) No. 1 Vertical Spindle Milling Machine. Very early (1912) Sales and Technical Specification Catalogue. 7 pages. ?5

      B800E BROWN and SHARPE (USA) No. 2Y Plain Milling Machine. Sales and Technical Specification Catalogue. 4 pages. ?2

      B800F BROWN and SHARPE No. 3 Vertical Milling Machine. Sales and Technical Specification Catalogue 1939. 8 pages. ?5

      B800G BROWN and SHARPE No. 3B Vertical Milling machine. Sales and Technical Specification Catalogue 1947 4 pages ?2

      B800H BROWN and SHARPE No. 10 Plain Milling Machine. Sales and Technical Specification Catalogue 1940 12 pages ?5

      B800J BROWN and SHARPE No. 12 Plain Milling Machine. Electrically Controlled. Sales and Technical Specification Catalogue 12 pages ?5

      B800K BROWN and SHARPE No. 12 Plain Milling Machine 3hp spindle Sales and Technical Specification Catalogue 1952 16 pages ?5

      B800L BROWN and SHARPE No. 13 Plain Milling Machine 3hp spindle Sales and Technical Specification Catalogue. 12 pages ?5

      B800M BROWN and SHARPE No. 22 Plain Milling Machine. Sales and Technical Specification Catalogue 1931 16 pages ?5

      B800N BROWN and SHARPE Vertical Milling Attachments and High-speed Milling Attachments for B and S Horizontal Milling Machines of the 1920s. 6 pages. ?2 8 pages ?2

      B801 BROWN and SHARPE No. 2 and 2B Surface Grinders. Sales and Detailed and well-illustrated Sales, Accessories & Technical Specification Catalogue. 12 pages ?5

      B801A BROWN and SHARPE Cylindrical Grinding and Indexing Attachment for Surface Grinders. Sales and Technical Specification Catalogue. 4 pages. ?0

      B812 BRYANT SYMONS Late Catalogue Set for the: Diamond Machining (4 pages); Piston-Turning Lathe Model 100POL (1 page); Piston-Turning Lathe Mk.2 (8 pages); Precision Diamond-Turning Lathes (16 pages). ?0

      BSA ACME GRIDLEY - See under ACME GRIDLEY

      B820 BSA Multi-Tool Production Lathe MT1. Detailed technical Sales and Technical Specification Catalogue 13 pages. ?5

      B860 BTM Watchmakers' Lathe: Sales and Technical Specification Catalogues. 4 pages of detailed descriptions and pictures. ?0

      B865 BUFFALO FORGE Sales and Technical Specification Catalog No. 205 "Mechanical Technology" dated 1916. Superb, full-range including the "Buffalo Complete Woodworker", Forges, Drills, Lathes, Band Saws, Woodworking Machinery, sets of exercises for learning the art of forging and welding and photographs of forge installations. 95 pages. ?5

      B866 BURDETT Model 60, 65 and 66 hand-operated surface grinders. Sales and Technical Specification Sheet. 2 pages. ?

      B866 BURDETT Model 70 and 75 Surface Grinders Mk.1 - with front-mounted wheel controls directly one above the other. 18" x 6" table. Sales and Technical Specification Catalogue. 12 pages (two catalogues, early and late). ?5

      B866A BURDETT Model 70 Surface Grinder Mk 2 - one wheel control in the centre and the other to the right and lower(also badged as the Elliott "Rapidgrind"). Detailed Sales and Technical Specification Catalogue. 10 pages. ?5

      B866Z BURDETT Slotting Machines Nos. 18, 18A, 20, 20A 8", 10", 12" AND 14". Sales and Technical Specification catalogues. 20 pages. ?5

      B870 BURKE Miller No. 1 hand-operated. Sales and Technical Specification Catalog with Vertical Head details and Price List - 1940s and 1950s models. 10 pages. ?8

      B870 BURKE Bench and Floor Millers No. 1,No.3, No. 4. Sales and Technical Specification Catalog. 4 pages. ?2

      B870B BURKE Milling Machines - All-models catalog: Millrite S/P, V/S, Vertical, Application Millers, Horizontal Model 333, NC Control Model 720B, N/C Millrite, Surface Grinders, Hand-operated Horizontal Millers No. 1, No.2, No. 4, No. 1 Half-mill, No. 2 Half-mill, Hy-Flex Hydraulic Miller and Accessories.58 Pages. ?5

      B870C BURKE Milling Machines - single-page advertising sheet with pictures of the Vertical and horizontal models and specifications of the Nos. 0. 1. 2. 3. 4 and 5 machines ?

      B890 BURKHADT and WEBER (BW) Reutlingen. Sales and Technical Specification Sheet Drills, Saws. ?2

      B896 BUSCH Milling Machines: two Sales & Technical Specification Catalogues, one for the FSO Vertical Universal and another All-Models edition showing the NF3, FW, NF-2-Q-150, FSV-5, FSV-6, FSU, NF-1 Special, NF-1 and NF-2. 8 pages ?6

      B906 BUTLER Full-range Catalogue circa 1930s and 1940s. 218 pages of superb illustrations showing: Planers, Shapers and Slotters. ?25 0

      B906A BUTLER Toolroom Slotters - later types with enclosed balance weights : Sales and Technical Specification Catalogue. 18 pages. ?5

      B907 BUTLER Toolroom Slotters - older tpes with exposed pivoted counter weight at the top: Sales and Technical Specification Catalogue. 16 pages. ?5

      B907C BUTLER Hydroplane Open-sided planers: Models 633, 833. Sales and Technical Specification Catalogues (2). 12 pages. ?2

      B907D Butler Toolroom Shapers: Very early Sales and Technical Specification Sheet. 2 sides. ?0

      B907E BUTLER "Super" Shapers SS18 and SS26 and Openside Crank Planers co36 and Sales and Technical Specification Catalogue. 12 pages. ?5.

      B907F BUTLER Elgamill Milling and Boring Machines. 4 Detailed Sales & Technical Specification Catalogues that shows the construction of the machines and explains their working principles Covers the all versions of the models: CS8, CS10, CS10V, DR12VA, CSN10, DR12, CR15V3, CR15V4, Typle L, Types T and NC, High-Power Models and Accessories. 62 pages. ?5

      B907G BUTLER Elgamill - catalogue showing the Elgamill machining large and complex jobs. 24 pages ?7

      C1 CADILLAC Lathes CM1422, CM1428, CM1440, CM1733, CM1749, CM1760, CM1780, CM2233, CM2260, CM2280 and CM22100. Sales, Technical Specification and Accessories Catalogue. 8 pages. ?5

      C2 CAPCO Surface Grinders hand-operated Size 1 and Size 2. Sales and Specification Catalogue. 12 pages (two editions included, early and late showing slightly different models) ?5

      C4 CARDIFF - manufactured by ELLIOTT. See under the Elliot section below - -

      C5 Carson Tool and Cutter Grinder. Sales, Accessories and Specification Catalogue with a page having as sectional drawing through the headstock with instructions concerning the bearing adjustment procedure. 12 pages. ?0

      C6 Carstens Lathe, milling machine and grinder literature. Five catalogues are available: 1) Carstens Lathes, 3 sales sheets: DRLZP Lathe Sales Sheet. 4 pages with detailed description & specification in English and German. 4 pages. 2) Carstens DRGK 600/130 plain-turning precision lathe Sales Sheet. 4 pages with detailed description & specification in English and German. 4 pages. 3) Carstens DMR plain-turning precision lathe. 2 pages. German text only 4) Carstens Milling Machines HVF 600/130 & HF 600/130. Sales & Specification Sheet. 2 pages 5) Carstens RESH 450/200 Cylindrical Grinder. Detailed Sales & Specification Catalogue. 8 pages. ?5

      C8 Carroll-Jamieson Masterturn lathe. Sales and Technical Specification Catalogue. 6 pages. ?2.

      C10 CASER Radial-arm Drilling Machines Models F25 and F30. Sales and Technical Specification Catalogue. 8 pages. ?2

      C11 CATARACT (Hardinge) Wonderful Full-range Catalogue circa 1910 - 1920 showing all the Precision Bench and Screwcutting Lathes, Milling Machines, Automatic Gear and Pinion Cutters, Drills and the full accessory range. Although not a handbook, there are many descriptive and illustrative details of the machines' construction, drive systems and countershafts including sectional drawings of the various headstocks. 116 pages. ?5

      C11A CATARACT (Hardinge) 1902 Catalogue: Bench Lathes and Attachments; precision bench drill. 29 pages. Not a first-class copy. ?5

      ?/span>C11B CATARACT (Hardinge) Wonderful Full-range Catalogue of Precision Lathes and Millers of the 1930s. Includes bench precision lathes, milling machines of the MD3, MD4 horizontal millers, BB2V (the vertical version of the horizontal BB4) and MD5 (horizontal with conventional overarm) types. Automatic Gear and Pinion Cutters, Drills and the full accessory range. Although not a handbook, there are many descriptive and illustrative details of the machines' construction, drive systems and countershafts including sectional drawings of the various headstocks.. 50 pages. ?5

      C11C CATARACT (Hardinge) No. 5 open-headstock flat-belt drive Milling Machine. Sales and Technical Specification Catalogue. 2 pages. ?

      C11D CATARACT (Hardinge) MD3 and MD4 (similar to the BB4 Type) Enclosed Head Precision Bench Milling Machines. Sales, Technical Specification and Accessories Catalogue. 4 pages. ?2

      C11E CATARACT (Hardinge) MD5 Precision Milling Machine. Sales, Technical Specification and Accessories Catalogue. 4 pages. ?2

      C15 CAV-Wade Miniature round-bed lathe. Detailed Sales and Technical Specification Catalogue with sectional and general-arrangement drawings. Two Catalogues combined (one especially interesting from the USA agent) with some duplication. This package represents all the data available for these lathes. 32 pages. ?5

      C20 CAZENEUVE HB500, HB575, HB 725 Lathes. Superbly illustrated Sales and Technical Specification and Accessories Catalogue with factory pictures. Dated 1960. 28 Pages. ?7

       

      C20A CAZENEUVE HB Toolroom and Production Lathes. Sales and Technical Specification Catalogue 1950s. 12 pages ?5

       

      C20B CAZENEUVE HB500 and HB575 Lathes. Sales and Technical Specification and Accessories Catalogue. 12 Pages. ?5

      C20C CAZENEUVE HBX360 Lathe. Sales and Technical Specification and Accessories Catalogue. 12 Pages. ?5

      C20D CAZENEUVE HBY590 Lathe. Sales and Technical Specification and Accessories Catalogue. 12 Pages. ?5

      C22 C.B.Ferrari Precision Miller Type MR2: Sales and Technical Specification and Accessories Catalogue. 16 pages. ?5

      CELTIC Lathes - see under Mondial

      C30 CENTEC Millers. A complete data pack for the maker including Models: 2A, 2B, 2C, all the 3-Series, No. 4 and Automil Models. 34 pages of maker's Sales and Technical Specification catalogues + the Operation Handbook. ?5

      C30A CENTEC "Low Cost Automation with Auto Pneumatic Indexing Rotary Tables. Sales and Technical Specification Catalogue 12 pages. ?5

      C30B CENTEC Senior ROUTER. Detailed technical Sales and Technical Specification Catalogue. 12 pages. ?5

      C34 CERIOTTI FCB-32 Capstan Lathe. Sales and Technical Specification Catalogue 4 pages. ?2

      C36 CHALLENGER Lathe. Sales and Technical Specification Catalogue. 8 pages. ?5

      C37 Champion Blower Forge Lathes. Sales sheets for the 9-inch, 10-inch, 13-inch and 16-inch models from the 1920s. 4 pages. ?2

      C39 Champion Lathes USA. Sales and Technical Specification Sheets. 12 pages showing the 12, 14, 16 and 18-inch lathes as they were circa 1905 - 1920. ?0

      C42 CHARD (Western Machine Tool Works USA): Catalog set including: A 36-page Full Range Publication with superb illustrations of the Timken-bearing lathes with belt and gear-drive headstocks including many sectional drawings; A full-range 12-page Catalog of the geared-head models and a 12-page Catalog featuring the Manufacturing Lathes ?5

      C45 CHRISTEN Universal Precision Milling Machines Type U-0 and U-0A,. Sales and Technical Specification and Accessories Catalogue 16 pages. ?5

      C45A/D12 CHRISTEN "Dan 1944" High Precision Lathe. Sales and Technical Specification and Accessories Catalogues - One in English with 12 pages, another in German. 26 pages in all. ?0

      C45B CHRISTEN "Atlantic" High Precision Lathe. Sales and Technical Specification and Accessories Catalogues - German Text. 6 pages. ?2

      CHURCHILL: we have a vast stock of Churchill Sales and Specification literature. If what you seek is not shown below, please enquire. Phone 01298-871633 e-mail your requirements :tony@lathes.co.uk



      C50X CHURCHILL Grinding Machines. Full-range Catalogue circa 1930s to 1940s. 206 superbly-illustrated pages with full specification details. ?5

      C50XX CHURCHILL Grinding Machines. Full-range Catalogue circa 1940s to 1950s. 121 superbly-illustrated pages with full specification details. ?5

      C50 CHURCHILL Universal Grinding Machines (1930s and 1940s). Sales and Technical Specification Catalogue. 12 pages. ?5

      C50A CHURCHILL Universal Grinding Machines (late 1940s and 1950s). Sales and Technical Specification Catalogue. 20 pages. ?5

      C50B CHURCHILL Universal Grinding Machines (late 1940s and 1950s). Sales and Technical Specification Catalogue. 20 pages. ?5

      C50C CHURCHILL Centreless Grinding Machines Model "BY". Sales and Technical Specification Catalogue. 8 pages. ?5

      C50D CHURCHILL-Cleveland Gear Hobber Model S-8-8. Sales and Technical Specification Catalogue. 4 pages. ?

      C50E CHURCHILL Plain Grinding Machines "AW" and "BW". Sales and Technical Specification Catalogue. 50 pages. ?0

      C50G CHURCHILL (Herbert)_ Precision Grinding Machines. General Catalogue with specifications for Models: AW, BW, CW, D, E, F, FA, FB, G, TWA, TWB, TWR, DCY, DCH, DE, CW, CRM,OH, PAW, PBW, Tool and Cutter Grinders, PCH, NB, OSB, OSD, OSV, VXA, VL, VH, VHM, NH, VB, VBA, RA, RBY, RD, HBY,HCY, HDY, HBA, HBM, Internal Cylinder Grinders, DUA, AC, UAC, HF, FH, BD, Cam Grinders, SHB, SHC, EC,CE, DE, LQ, AJB, AJW, DAJ, DAX, UHR, UH, UR, and PUA. 20 pages. ?5

      C50H CHURCHILL (Herbert) BX Series 2 Cylindrical Grinding Machines. Sales and Technical Specification Catalogue. 14 pages. ?5

      C50cw CHURCHILL CW 12" and 16" swing Plain Grinding Machines. Sales and Technical Specification Catalogue. 16 pages. ?0

      C50dcy CHURCHILL DCY Crankpin Grinder. Sales and Technical Specification Catalogue. 6 pages. ?2

      C50ec CHURCHILL EC Centreless Grinding Machines. Sales and Technical Specification Catalogue. 6 pages. ?2

      C50f CHURCHILL Models F and D/E Heavy Crankshaft Grinding Machines. Sales and Technical Specification Catalogue. 20 pages. ?5

      C50nb CHURCHILL NB Horizontal Surface Grinder. Sales and Technical Specification Catalogue. 28 pages. ?7

      C50osc CHURCHILL OSC Horizontal Spindle Surface Grinder. Sales and Technical Specification Catalogue. 8 pages. ?2

      C50osb CHURCHILL OSB Horizontal Spindle Surface Grinder. Two Sales and Technical Specification Catalogue. 16 pages. ?0

      C50osd CHURCHILL OSD Open Side Surface Grinding Machine. Sales and Technical Specification Catalogue. 8 pages. ?2

      C50pah CHURCHILL PAH, PBH and PCH Universal Grinding Machines. Sales and Technical Specification Catalogue. 16 pages. ?0

      C50paw CHURCHILL PAH Universal Grinding Machines. Detailed Sales and Technical Specification Catalogue. 50 pages. ?0

      C50pbw CHURCHILL PBW Universal Grinder. Sales and Technical Specification Catalogue. 20 pages. ?5

      C50pch CHURCHILL PCH Universal Grinding Machine. Sales and Technical Specification Catalogue. 16 pages. ?0

      C50ph400 CHURCHILL PH400 Gear Hobbing Machine. Sales and Technical Specification Catalogue. 22 pages. ?0

      C50shear CHURCHILL GEAR SHAVING MACHINES. Sales and Technical Specification Catalogue.16 pages. ?5

      C50K CHURCHILL Vertimax No. 3 Chucking Lathe. Sales and Technical Specification Catalogue.16 pages. ?5

      C50L CHURCHILL PH-1612 Hobbing Machines. Sales and Technical Specification Catalogue.28 pages. ?7

      C50M CHURCHILL 450CNC Turning Machine. Sales and Technical Specification Catalogue.20 pages. ?5

      C50N CHURCHILL Computurn 290 Lathe. Sales and Technical Specification Catalogue.12 pages. ?0

      C50P CHURCHILL HB600 Horizontal Boring and Milling Machine. Sales and Technical Specification Catalogue.10 pages. ?0

      C50Q CHURCHILL HB1200 Horizontal Boring and Milling Machine. Sales and Technical Specification Catalogue.10 pages. ?0

      C50R CHURCHILL 250NC Universal Turning Machine. Sales and Technical Specification Catalogue. 20 pages. ?5

      C50S CHURCHILL 350NC Universal Turning Machine. Sales and Technical Specification Catalogue. 20 pages. ?5

      C50T CHURCHILL Red Century 1250NC T-bed twin-tool Contouring Lathe. Sales and Technical Specification Catalogue. 8 pages. ?0

      C50U CHURCHILL CA500 Single Spindle Chucking Automatic Lathe. Sales and Technical Specification Catalogue. 24 pages. ?7

      C50V CHURCHILL CTC4 slant-bed lathed twin-tool Contouring Lathe. Sales and Technical Specification Catalogue. 6 pages. ?2

      C61 CHURCHILL (Churchill-Denham) OC28 Oil Country Lathe. Sales and Technical Specification Catalogue. 6 pages. ?2

      C62 CHURCHILL-REDMAN early 7-inch centre-height lathe - geared and flat-belt headstocks. Sales and Technical Specification Catalogue. 4 pages. ?

      C62A CHURCHILL-REDMAN very early 8.5-inch centre-height lathe - flat-belt headstock. Sales and Technical Specification Sheet. 2 pages.?

      C62B CHURCHILL-REDMAN 30" and 36" Square planing Machines. Sales and Technical Specification Sheet. 3 pages. ?

      C62C CHURCHILL-REDMAN CUB Technical Sales and Technical Specification Catalogue - with superb illustrations. 12 pages. ?5

      C62D CHURCHILL-REDMAN CUB: Blue Print of 3-speed gearbox on leadscrew end and changewheel-carrying arm (banjo). Blue print of Apron. ?2

      C62E CHURCHILL-REDMAN "C-R" Cone-drive Precision lathes 12 and 16-inch swing. Sales and Technical Specification Catalogue 12 pages. ?5

      C62F CHURCHILL-REDMAN "C-R" Helical-geared Head Precision lathes 12 and 16-inch swing. Sales and Technical Specification Catalogue. 22 pages.?5

      C62G CHURCHILL-REDMAN N.M. Lathes: 7", 9" and 11" Models. Sales and Technical Specification Catalogue. 8 pages. ?5

      C62H CHURCHILL-REDMAN N.M. Lathes: 13" and 15" Models. Sales and Technical Specification Catalogue. 8 pages. ?5

      C62J CHURCHILL-REDMAN N.M. Lathes: 7", 9", 11", 13", and 15" Models detailed Sales and Technical Specification Catalogue. 18 pages. ?5

      C62K CHURCHILL-REDMAN N.M. Lathes: 7" and 9" Models. Later Sales and Technical Specification Catalogue 8 pages. ?5

      C62L CHURCHILL-REDMAN Heavy-duty 22L and 28L Lathes. Detailed Sales and Technical Specification Catalogue. 14 pages. ?5

      C62M CHURCHILL-REDMAN C-R SHAPER. Detailed Sales and Technical Specification Catalogue. 16 pages. ?5

      C100C CINCINNAT Milling Machines and Universal & Reamer Grinders: Full-range catalog dated 1913. A superb, beautifully-illustrated publication that shows the full range of machines and accessories together with a "Tour of the Works" and a number of interesting technical articles detailing the machines' design and construction. 134 pages. ?5

      C100D CINCINNATI Full-range Catalogue 1924. A superb, 135-page beautifully-illustrated publication that shows the full range of machines and accessories together with a "Tour of the Works" and a number of interesting technical articles detailing the machines' design and construction. 135 pages. ?5

      C100E CINCINNATI Full-range Catalogue 1961. Rare 71-page publication listing Milling machines, Broaching Machines, Cutter and Tool Grinding Machines, grinding Machines, Grinding Wheels, Selective Hardening Machines, Metal Forming Machines, Special Machine Tools, Accessories. ?5

      C101 CINCINNATI Hydrashift Lathe. Sales and Technical Specification Catalogue 1962 24 pages. ?5

      C101A CINCINNATI Hydrashift Lathe. Sales and Technical Specification Catalogue 1967 24 pages. ?5

      C101B CINCINNATI "Tray Top" Cintilathe Lathe (early version). Sales and Technical Specification Catalogue. 6 pages. ?6

      C102 CINCINNATI No. 2 Tool and Cutter Grinder Catalogue Collection including:
      First Edition, 1931 with 32 detailed pages;
      1934 with 6 pages;
      1939 with 34 detailed pages;
      1948 with 12 pages;
      1972 with 12 pages. ?5

      C102A Cincinnati Monoset Tool & Cutter Grinder. Detailed Sales and Technical Specification Catalogue. 16 Pages. ?5

      C103C Cincinnati Dial Type Milling Machines. Mid 1930s Sales, Accessories and Technical Specification Catalogue. Superbly illustrated and very detailed. 40 pages. ?7

      C103D Cincinnati Dial Type Milling Machines - late models Types 207-12 and 307-12 and ELR. Sales, Accessories and Technical Specification Catalogue. 8 pages. ?2

      C224E Cincinnati Dial Type Milling Machines late models Types 315-15, 415-15, 420-16 and 520-16. Sales, Accessories and Technical Specification Catalogue. 24 pages. ?5

      C224F Cincinnati Dial Type Milling Machines Types 520-20, 540-20, 620-20 and 640-20 and ELA. Sales, Accessories and Technical Specification Catalogue. 24 pages. ?5

      C224G Cincinnati Dial Type Milling machines Nos. 3 and 4 Model OM. Sales, Accessories and Technical Specification Catalogue. 28 pages. ?5

      C222 Cincinnati TOOLMASTER Precision Milling Machine. Early "rounded style" machines Models A, B, C, D, E and H-s. Sales, Accessories and Technical Specification Catalogue. 24 pages. ?5

      C222A Cincinnati TOOLMASTER I-D Precision Milling Machine (early "rounded style"). Sales, Accessories and Technical Specification Catalogue. 6 pages. ?2

      C222B Cincinnati TOOLMASTER Precision Milling Machine Model DD with the later "angular style". Sales, Accessories and Technical Specification Catalogue. 16 pages. ?5

      C222C Cincinnati TOOLMASTER Precision Milling Machine Model MT - the last version manufactured. Rare Sales, Accessories and Technical Specification Catalogue. 16 pages. ?5

      C223 Cincinnati CONTOURMASTER Tool and Die Milling Machine Models 1A, 1B, 1B. Sales, Accessories and Technical Specification Catalogue. 24 pages. ?0

      C223A Cincinnati CONTOURMASTER Tool and Die Milling Machine Models 1B, 1B. later Sales, Accessories and Technical Specification Catalogue. 16 pages. ?5

      C223B Cincinnati 8" x 18" Tool and Die Milling Machine. Sales, Accessories and Technical Specification Catalogue. 20 pages. ?5

      C224 Cincinnati No.2 M1 Plain and Universal Milling Machine. Sales, Accessories and Technical Specification Catalogue. 30 pages. ?5

      C224A Cincinnati Milling Machines 1-18. Sales, Accessories and Technical Specification Catalogue. 8 pages. ?2

      C224B Cincinnati "Cinedo" Milling Machines. Very detailed Sales, Accessories and Technical Specification Catalogue with useful annotated control diagrams. (1967). 38 pages. ?7

      C224C Cincinnati CINOVA 80 Milling Machine Sales, Accessories and Technical Specification Catalogue. 46 pages. ?7

      C224H Cincinnati 205-12 MI Milling Machines Sales, Accessories and Technical Specification Catalogue.33 pages. ?0

      C224J Cincinnati I-18 Automatic Milling Machine Catalogue. 8 pages. ?2

      C224K Cincinnati CONTOURMASTER Milling Machine Catalogue. 14 pages. ?0

      C224L Cincinnati HYDROTEL 16" Milling Machine Catalogue. 24 pages. ?5

      C224M Cincinnati HYDROTEL 28" Vertical Milling Machine Catalogue. 18 pages. ?5

      C224N Cincinnati HYDROMATIC 3-36 Plain and Duplex Milling Machine Catalogue. 6 pages. ?2

      C224P Cincinnati HYPOWERMATIC Milling Machine Catalogue. 29 pages. ?0

      C224Q Cincinnati HYPOWERMATIC Tracer Controlled Milling Machine Catalogue. 29 pages. ?0

      C230 Cincinnati Milling Machine Accessory Leaflets: Wide Range Divider to fit Cincinnati Milling Heads with table of angular divisions. 4 pages. 10", 12" and 14" Dividing Heads, Slotting Attachment Head, Precision Measuring Equipment (length rods), 12", 16", 20" and 24" Circular Milling Attachments. 16 pages. ?0 ?

      C230A Cincinnati Milling Machines Spindle Attachments Catalogue. A fascinating publication showing the various vertical heads, adaptations and accessories to mount on Cincinnati milling machines. 12 pages. ?6

      C230B Cincinnati Arbors and Adaptors Catalogue. Shows the full range of Spindle Arbors, Adaptors and the "Arbor-Loc" system. 24 pages. ?0

      C250 Cincinnati 10" and 14" Filmatic Plain Hydraulic Cylindrical Grinding Machines Catalogue. 24 pages. ?0

      C250A Cincinnati No. 2 Centreless Grinder Model OM Catalogue. 12 pages. ?6

      C250B Cincinnati No. 3 Centreless Grinder Catalogue. 16 pages. ?0

      C250C Cincinnati Model LR "Centuramic" Centreless Grinder Catalogue. 16 pages. ?0

      C326 CLARKSON Tool and Cutter Grinder. Sales and Technical Specification Catalogue 6 pages. ?

      C328 Clarkson Tool and Cutter Grinder Machine and Accessories Catalogue 12 pages. ?2

      C330 CLAUSING (USA) "Dual" Metal and Wood Lathe Catalogue. The earliest known - 1938. Shows the first No. 10 lathe - later named the 100 12 pages. ?2

      C332 CLAUSING 1940 Catalogue showing the Models 100, 101, 102, 103, 104, 105, 106, 107, 108, 109, 110, and 111 12-inch swing lathes and Accessories 16 pages. ?0

      C334 CLAUSING 1943 Catalogue (No. 44A) showing the Models 100, 102, 103, 106, 109 12-inch swing lathes and Accessories 16 pages. ?0

      C336 CLAUSING 1945 Catalogue (No. 46A) showing the Models 100, 102, 103, 105, 108, 111 12-inch swing lathes and Accessories 12 pages. ?0

      C338 CLAUSING 1950 Catalogue showing the full range of 100 and 200 Series lathes and Accessories 16 pages. ?0

      C339 ALL THE ABOVE EARLY CLAUSING CATALOGS for the 100 and 200 range. ?5

      C340 Clausing Model 6300 12-inch Lathe Catalogue with Accessories 14 pages. ?0

      C342 Clausing Model 5300 12-inch Lathe Catalogue with Accessories 14 pages. ?0

      C344 Clausing Model 4800 12-inch Lathe Catalogue with Accessories 14 pages. ?0

      C345 Clausing 4900 10-inch lathe Catalogue with Accessories 14 pages. ?0

      C346 Clausing Sales and Technical Specification Catalogue for the 1" collet capacity Series 200 lathe 6 pages. ?2

      C348 Clausing Lathes: full-range Catalogue (1961) 16 pages. ?0

      C350 Clausing Lathes Accessories: Catalogue (1961) 8 pages. ?2

      C352 Clausing 1300 and 1500 Variable-speed lathes, Sales and Technical Specification Catalogue 8 pages. ?2

      C353 Clausing/Colchester 13", 15" and 17" Sales and Technical Specification Catalogue. 4 pages. ?2

      C354 Clausing/Colchester 13" and 15" Detailed Sales and Technical Specification Catalogue late 1950s early 1960s "Round-head" lathes 16 pages. ?0

      C355 CLAUSING Model 14 New-style 14.5" swing model with dial-selection of spindle speeds. 12 pages. ?0

      C356 Clausing full-range Catalogue showing the lathes of the 1960s and 1970s. Contains full details of all the lathes (including imported and re-badged English Colchester models): 17 -inch, 15-inch, 13-inch; 6900 Series (14-inch); 5900 Series (12-inch); 4900 Series (10-inch) and Accessories for the full range. Vertical and Horizontal Millers and Drill Presses. 82 pages. ?5

      C357 Clausing Lathe Catalogue 1969: 13", 15" and 17" lathes and accessories 20 pages. ?0

      C358 CLAUSING VERTICAL MILLER Model 8520 and 8525 Sales and Technical Specification Catalogue 6 pages. ?2

      C358A CLAUSING VERTICAL MILLER Model 8530 and 8531 Sales and Technical Specification Catalogue and HORIZONTAL MILLER 8540, 8541, 8550 and 8551 10 pages. ?0

      C360 CLEMENT Watchmakers' Lathes (USA): "The Clement Master Watchmakers' Lathe Outfit". A very rare Sales and Technical Specification Booklet. 1923 ?perfect copy. A remarkably eccentric production with not only technical details of the lathe and its accessories also home-sum business philosophies and Strange homilies. 20 pages. ?5

      C360a/MC235 CLEMENT Watchmakers' Lathe "Instructions for Use of Attachments" together and a separate publication "Attachments Catalog" ?5

      C360b Clement Watchmakers' Lathes: 1927 Catalogue with "blue print" showing improvements to the lathe. CD-ROM or print. 12 pages. ?0

      C360c Clement watchmakers' Lathes: Sales and Technical Specification Catalogue and Price-lists from 1946 showing the Standard Lathe, Pivot Polisher, the Combined Lathe Attachment and the Clement Manufacturing Lathe. 8 pages. ?5

      C360d Clement Watchmakers' Lathes: all the above Clement literature: ?5 CLEMENT

      C365 CLEVELAND (USA) Pivot-head Turret Miller Series BM: Sales and Technical Specification Catalogue 8 pages. ?5

      C365A CLEVELAND (USA) Dial Type Milling Machines. Sales and Technical Specification Sheet with specs of models "u, 3U, 4H, 5H, 6H, 4HM, 5HM, 6HM, 2V, 3V, 4V, 5V, 6V 4 pages. ?5

      C365A CLEVELAND (USA) Straight-sides Single Crank Presses. Detailed Sales and Specification Catalogue. 24 pages. ?5

      C367 MERLI CLOVER LATHES - Sales, Technical Specification & Accessories Catalogue Set: Models 30/41, 36/47, 20/30, 22/33b, 18/27 and "Clovis 50". 36 pages. ?7

      C370 COCHRANE-BLY Universal Vertical Miller-Shaper. Interesting Sales and Technical Specification catalogue. 8 detailed pages. ?0

      C370A COCHRANE-BLY Complete Product Range Catalogue showing the BLY Universal Vertical Miller-Shaper (8 pages including accessories) and the sawing machines No.1, No.2B, No.4C, No.5, No.6, No.66, No.666 and No.7. The No.21 and No.21-SA High-speed saws, the No.11 Automatic Saw Sharpening Machine, the Bench Filing Machine and the No.2 Floor-standing Filing machine. 32 Pages. ?9

      C389 COLCHESTER LATHES - Factory Tour 1960s showing elements of the manufacturing process, assembly, etc. 22 pages. ?5

      c390 COLCHESTER LATHES - A full set of very early Catalogues for the Bantam, Master, Triumph and Mascot from the late 1920s to early 1950s. These show both the open flat-belt drive and geared-headstock types. 40 pages. ?7 (see below for individual catalogues from the set)

      C390A COLCHESTER BANTAM 5-inch 1920s and 1930s Flat-belt Drive Model. Sales and Technical Specification Catalogue. 4 pages. ?2

      C390B COLCHESTER MASTER 6-inch 1920s and 1930s Flat-belt Drive Model. Sales and Technical Specification Catalogue. 4 pages. ?2

      C390C COLCHESTER MASTER 6-inch 1930s to mid-1940s Geared-head Model. 2 Sales and Technical Specification Catalogues showing the Changewheel and Screwcutting-gearbox versions. 8 pages. ?5

      C490D COLCHESTER TRIUMPH 7-inch 1920s and 1930s flat-belt drive model. Sales and Technical Specification catalogue. 4 pages. ?2

      C390E COLCHESTER TRIUMPH 7-inch 1930s to mid-1940s Geared-head Model. 2 Sales and Technical Specification Catalogues showing the Changewheel and Screwcutting-gearbox versions. 8 pages. ?5

      C390FG COLCHESTER MASCOT 8-inch 1920s and 1930s Flat-belt Drive and Geared Head models. Two Sales and Technical Specification Catalogues. 8 pages. ?6

      ?/span>C390H COLCHESTER "PRECISION" 7-inch lathe. Rare geared-head Toolroom Colchester of the 1930s. Sales and Technical Specification Catalogue. 4 pages. ?2

      C390J COLCHESTER MASTER 6.5-inch mid-1940s to early 1950s Geared-head Model. 2 Sales and Technical Specification Catalogues. 8 pages. ?5

      C390K COLCHESTER TRIUMPH 7.5-inch mid-1940s to early 1950s Geared-head Model. Sales and Technical Specification Catalogue. 4 pages. ?2

      C390L COLCHESTER MASCOT 8.5-inch mid-1940s to early 1950s Geared-head Model. Sales and Technical Specification Catalogue. 4 pages. ?2

      COLCHESTER LATHES - from the early 1950s onwards:

      C395 COLCHESTER BANTAM 5-inch "800 Mk 1" Sales and Technical Specification Catalogue 4 pages. ?2

      C395A COLCHESTER CHIPMASTER 5-inch 4 Sales and Technical Specification Catalogue with 2, 4, 6 and 8 pages. ?0

      C395B COLCHESTER STUDENT 6-INCH Mk.1 1950s Models. 4 Sales and Technical Specification Catalogues with 4, 6, 8 and 12 pages. A full data pack for the lathe. ?5

      C395C COLCHESTER MASTER 6.5-INCH Mk.1 1950s Models. 4 Sales and Technical Specification Catalogues with 2, 4, 6 and 8 pages. ?5

      C395D COLCHESTER TRIUMPH 7.5-INCH Mk.1 1950s Models. 3 Sales and Technical Specification Catalogues with 2, 4 and 8 pages. ?0

      C395E COLCHESTER MASCOT 8.5-INCH Mk.1 1950s Models. 4 Sales and Technical Specification Catalogue with 2, 4, 6 and . 6 pages. ?5

      COLCHESTER LATHES from the 1960s ONWARDS:

      C400A COLCHESTER BANTAM 1600 Mk 1 ("rounded" headstock) Sales and Technical Specification Catalogue. 4 pages. ?2

      C400B COLCHESTER BANTAM 800 Mk 2 ("square" headstock) Sales and Technical Specification Catalogue. 4 pages. ?2

      C400C COLCHESTER BANTAM 1600 Mk 1 ("rounded" headstock) Sales and Technical Specification Catalogue. 4 pages. ?2

      C400D COLCHESTER BANTAM 2000 Sales and Technical Specification Catalogue. 10 pages. ?5

      C401 COLCHESTER CHIPMASTER Sales and Technical Specification Catalogue. 10 pages. ?5

      C370A COLCHESTER Student Mk 2 Sales and Technical Specification Catalogue. 6 pages. ?2

      C370B COLCHESTER Student 1800 Sales and Technical Specification Catalogue. 12 pages. ?5

      C370C COLCHESTER Student 2500 Sales and Technical Specification Catalogue. 4 pages. ?2

      C370C COLCHESTER Student 3100 Sales and Technical Specification Catalogue. 7 pages. ?2

      C371A COLCHESTER MASTER Mk 2 Sales and Technical Specification Catalogue. 7 pages. ?2

      C371 COLCHESTER MASTER 2500 Sales and Technical Specification Catalogue. 10 pages. ?5

      C371 COLCHESTER MASTER VS3250 Sales and Technical Specification Catalogues (2 issues) 6 pages. ?2

      C372A COLCHESTER TRIUMPH (15" swing) Mk 1: Sales and Technical Specification Catalogue 4 pages. ?2

      C372B COLCHESTER TRIUMPH 2000 Sales and Technical Specification Catalogue 10 pages. ?2

      C372C COLCHESTER TRIUMPH VS2500 Sales and Technical Specification Catalogue 10 pages. ?2

      C372Z COLCHESTER Triumph HYDROPOWER Multi-purpose manual and Auto-Cycle Lathe with Multi-cut Copying Equipment. Sales and Technical Specification Catalogue. 14 pages. ?0 C373C COLCHESTER MASCOT 1600 First Edition highly detailed Sales and Technical Specification Catalogue. 18 pages. ?5

      C373D COLCHESTER MASCOT 1600 Simplified Sales and Technical Specification Catalogue. 4 pages.?2

      C373E COLCHESTER MASCOT VS2000 Sales and Technical Specification Catalogue. 4 pages.?2

      C374 COLCHESTER MASTIFF 1400 Sales and Technical Specification Catalogue. 8 pages. ?5

      C374A COLCHESTER MASTIFF VS1800 Sales and Technical Specification Catalogue. 4 pages. ?2

      C380 COLCHESTER MAGNUM 1250 Sales and Technical Specification Catalogue. 5 pages. ?2

      C390 COLCHESTER FULL-RANGE CATALOGUE 1970s machines: Bantam, Chipmaster, Student 1800, Master 2500, Triumph 2000, Mascot 1600, Mastiff 1400, and Full Accessories Lists. 30 pages. ?5

      Colchester CNC Lathes

      C395 COLCHESTER Master 2500 CNC Sales and Technical Specification Catalogue. 2 pages. ?

      C395A COLCHESTER CNC 4000/4000L Universal lathe. Sales and Technical Specification Catalogue. 10 pages. ?5

      C395B COLCHESTER CNC Tornado A Series. Sales and Technical Specification Catalogue. 8 pages. ?5

      C395C COLCHESTER ALPHA Computer-assisted lathes: Models: 330, 400, 460, 550 and 800. 4-page Specification Catalogue. ?

      C393D COLCHESTER Lathes Range Catalogue 1999. Features CNC and conventional models: Tornado A50, Tornado A90, Tornado 119, Tornado 210, Tornado 310, Combi 2000, Combi 3000, Combi 4000, Bantam 2000, Student 2500, Master VS3250, Triumph VS2500, Mascot VS2000, Mastiff 1800, Magnum 1250 and Magnum LB800. 12 pages. ?0

      C395X COLCHESTER HYDRO NC450 Numerically Controlled lathe. Sales and Technical Specification Catalogue. 14 pages. ?0

      C490 COLUMBIA (USA) No. 1 Vertical Milling Machine Sales and Technical Specification Catalogue 4 pages.?2

      C495 CONOVER LATHES:

      CORONA Drills - see under the makers POLLARD

      C500 CORONET ELF Wood Turning Lathe and Accessories Assorted advertising Sheets. 22 pages. ?2

      C501 Coronet Major Wood Lathe and Accessories Sales and Technical Specification Sheets. 12 pages. ?2

      C502 Coronet "Wood Working and Wood Turning on Universal and Independent Machines" Booklet showing the Coronet range and the sort of work they could undertake. 31 pages. ?5

      C550 COS-PAR Dividing Heads. Instructions for Use with Parts as Sectional Drawings and extensive Indirect and Differential Tables. ?7

      C600 CRAFTSMAN/COMPANION/DUNLAP (USA): compilation of all 95 pages from the Craftsman Catalogues that show metal-turning lathes. Covers: 1929, 1930, 1932, 1933, 1935, 1936, 1937, 1938, 1939, 1940, 1941, 1942 and 1943 - when the Catalogue was withdrawn..then 1948, 1949, 1950, 1952, 1953, 1954, 1955, 1957 and 1960/61 86 pages. ?5

      C602 CRAFTSMAN "The Wood Lathe" An instructional booklet to accompany the firm's wood-turning lathes. Published from the 1930s to the 1960s. 32 pages. ?5

      C605 CRAIG and DONALD Power Presses. Sales and Specification Catalogue. 55 page. ?7

      C610 CRAVEN Vertical Boring and Turning Mills. Technical Sales and Technical Specification Catalogue 1953 for the 5 foot to 20 foot machines with useful details of the operator's controls, screwcutting and taper turning possibilities. 24 pages. ?7

      C610A CRAVEN Wheel Lathes for Railway Wheel Sets. Sales and Technical Specification Catalogue.24 pages. ?7

      C610B CRAVEN Worm Thread Grinding Machine. Technical Sales and Technical Specification Catalogue. 8 pages. ?5

      C12 CRAWFORD-SWIFT see under SWIFT

      C620 CROFTS B.O.M.-L Clutches - detailed Catalogue with useful sectional drawings 50 pages. ?5

      C700 MC530 CROMWELL (Smallpiece) Precision Lathe Manual. A compendium of all the available Cromwell literature (including a Sales and Technical Specification catalog for the 4-inch Mk.2 Model) that includes Sectional Parts Drawings of the whole lathe (for English and Metric gearboxes) Wiring Diagrams, Operating Instructions and a reproduction of four original Catalogues showing all the accessories. ?0

      C750 CROSS (USA) No.20 Universal Milling Machine Sales and Technical Specification Catalogue 6 pages. ?5

      C752 CROUZET TC125 lathe (Model 86.105) sales and Accessories catalogue (French Text) 4 pages. ?2

      C752A CROUZET General Catalogue. Includes lathes models: 86.105, 86.106, 86.107, 86.123. Milling machines Types: 86.206, 86.202, 86.204, 86.207 and presses, etc. (French Text) 27 pages. ?0

      C755 CROWTHORN Lathes. A set of complete-range, well-illustrated and detailed Sales, Technical Specification and Accessories Catalogues spanning the 1950s and 1960s with details of the following Models: 7.5" MD, 8.5" MD; 10.5" HD, 12" & 12.5", 15" & 18" and 15" & 18" HD; 27" swing, the "New Crowthorn Mk.2", 30" & 36" swing Boring & Facing Lathes; 8.5" (17"-swing) Boring, Parting-off and facing lathe; 10.5" and 12.5" Combination Turret Lathes; the 19.5" shaper and sets of price lists and delivery times, etc. 95 pages. ?5

      C755A Crowthorn 19.5-inch Shaper. Sales, Specification & Accessories Catalogue. 5 pages. ?2

      C755B We also have a large collection of individual Crowthorn Sales, Accessories and Technical Specification Catalogues and can provide data about most of their models.

      C760 CROWNINGSHIELD (USA) Horizontal and Vertical Milling Machines Complete Range Sales and Technical Specification Catalogue 6 pages. ?2

      C762 CRYER and DAWSON "Stalwart" lathe: Sales and Technical Specification Catalogue. 4 pages. ?

      C770 CRYSTAL LAKE Precision Bench Lathe. Sales and Technical Specification Catalogue circa 1930s/1940s. 4 pages. ?2

      C770A CRYSTAL LAKE Precision Bench Universal Grinder (USA). Unusually small and finely-made precision machine. Sales and Technical Specification Catalogue circa 1930s/1940s. 6 pages + letter from maker. ?6

      C780 SCEPEL Radial-arm Drills Range Catalogue with annotated control diagrams covering Models: RF-50/1000, RF-1250, RF-1600, RFh-75/1500, RFh-1750, RFh-2000, RFh-100/2250 and RFh-3000. 24 pages. ?7 C790 CUNCLIFF and Croom (Manchester England) Machine Tool Catalogue showing Lathes, Milling Machines, Horizontal Borers, Planers, Planer-Millers, Gear Cutter, Railway Wagon Wheel Lathes, slotters, etc. Circa 1910. 70 pages. ?5

      C790A CUNLIFFE and Croom No. 2 Milling Machine: Sales and Technical Specification Catalogue. 28 pages. ?7

      C800 CVA 1 and 1A Series Super-Precision Toolroom lathe. Collection of early to late Sales and Technical Specification Catalogues including the last "Coles-built" machines. (CVA Handbook, Spares Parts Lists and Sectional Drawings also available) 41 pages. ?5

      C800A CVA Precision Bench Plain-turning, Second-operation Lathes and Miniature Precision Capstan Lathes. 4 Sales and Technical Specification Catalogue giving a complete data pack for these machines. 24 pages. ?0

      C800B CVA No. 79 vertical miller. Sales and Technical Specification Sheet. 2 pages. ?

      D05 DALRAE MIDGEMILL and SPEEDMILL Vertical Milling Attachments. Detailed Sales and Technical Specification Catalogue. 6 pages. ?5

      D10 Dalton Catalog Collection covering Combination Machine and 7-inch, 8-inch and 9-inch lathes. 36 pages. ?7

       

      D15A DARLING and SELLERS 10.5-inch Lathe. Two comprehensive Sales and Technical Specification Catalogues, one early, the other late. 24 pages. ?0

      D17 DANCKAERTS British Wood Working Machinery: Sales and Technical Specification Catalogue. 12 pages. ?2

      D18 DAVIS = Stuart Davis = "SDM" Precision CNC Cylindrical Grinders Model CNC 450 Sales and Technical Specification Catalogue. 4 pages. ?2

      D20 DEAN, SMITH and GRACE: circa 1890 full-range Catalogue showing lathes, millers, drills, bending machines, saws, surfacing, buffing, grinding, slotting, punching and boring machines, planers, keyway cutters, chucks, tooling, etc. 80 pages. ?5

      D20A DEAN, SMITH and GRACE 1930s and 1940s - a collection of Sales and Technical Specification Catalogues that shows the then current range: "Super High-Speed Production Lathes in 7, 8.5, 10 and 12-inch sizes - 20 pages. "DSG Centre Lathes in 9" and 9" Heavy and Medium Duty Sizes" - 8 pages plus large fold-out picture. "DSG Centre Minor Lathe - 8 pages plus large fold-out picture. "DSG Lathes of Distinction" - temporary just post-war catalogue 28 pages. TOOLROOM LATHE 16" Swing. Sales and Technical Specification Catalogue 1940 - Hurricane Fighter on the front cover. 22 pages. ?5

      D20B DEAN SMITH and GRACE 1948 Catalogue showing the Model A and B lathes in all their configurations. 22 pages. ?7

      D20C DEAN, SMITH and GRACE 1950s Full Range Sales and Technical Specification and Specification Catalogue (small format) 24 pages. ?7

      D20D Dean Smith and Grace Lathes. 1960s Full-range Sales and Technical Specification and Specification Catalogue. 24 pages. ?7

      D20E DEAN, SMITH and GRACE: 1970s Full-range Sales and Technical Specification and Accessories Catalogue. 32 pages. ?7

      D20F DEAN, SMITH and GRACE Centenary Booklet 1965. Detailed description of the Company's development. Includes a comprehensive factory tour showing the entire production process from casting to final testing. 60 pages. ?5

      D20G DEAN, SMITH and GRACE Book "A Little Farm Well Tilled". A well-illustrated and interesting publication circa early 1960s covering the history of the Company. 82 pages. ?5

      D20H Dean Smith and Grace 30 and 36XS Lathes. Sales and Technical Specification Catalogue. 18 Pages. ?5

      D20J Dean Smith and Grace 13-07 Lathe. Sales and Technical Specification Catalogue. 18 Pages. ?5

      D20K Dean Smith and Grace 15 and 17-inch lathes. Sales and Technical Specification Catalogue. 22 Pages. ?0

      D20L Dean Smith and Grace 16-09 Lathe and 16-09 Hydraulic Copying Units. Sales and Technical Specification Catalogues. 46 Pages. ?5

      D20M Dean Smith and Grace 16-09ct Lathe. Sales and Technical Specification Catalogues. 16 Pages. ?5

      D20N Dean Smith and Grace 17-09 Lathe. Sales and Technical Specification Catalogues. 16 Pages. ?5

      D20P Dean Smith and Grace 18a-21 Lathe. Sales and Technical Specification Catalogue. 26 Pages. ?0

      D20Q Dean Smith and Grace 19-10 and 21-12 Lathes. Sales and Technical Specification Catalogue. 14 Pages. ?0

      D20R Dean Smith and Grace 19-10t Lathe. Sales and Technical Specification Catalogue. 8 Pages. ?6

      D20S Dean Smith and Grace 21-12sb Lathe. Sales and Technical Specification Catalogue. 14 Pages. ?0

      D20T Dean Smith and Grace 22-25 and 26-30 Lathes. Sales and Technical Specification Catalogue. 28 Pages. ?7

      D20U Dean Smith and Grace 24-15 Lathe. Sales and Technical Specification Catalogue. 16 Pages. ?5

      D20V Dean Smith and Grace 30TC Numerically Controlled Lathe. Sales and Technical Specification Catalogue. 32 Pages. ?5

      D20W Dean Smith and Grace (MONARCH) VMC-200, RT, HMC,2415, 25/30XS and 25P Lathes. Sales and Technical Specification Catalogue. 14 Pages. ?5

      D20RX Dean Smith and Grace Lathes. General Sales and Technical Specification for Models: 13-1, 1609, 1709, 1910, 1910T, 2112, 18-21, 22-25, 26-30, 1609CT, 2112CT, 24CT, 25P, 30TC and Hydraulic Copy Units.32 Pages. ?7

      D20Y DEAN, SMITH and GRACE: Hydraulic Copying on Dean Smith and Grace lathes: a descriptive Instruction Book showing the principles and methods used in the DSG system. 43 pages. ?0

      D20Z DEAN, SMITH and GRACE: Hydraulic Copying on the 17-inch and 21-inch lathes. A descriptive Instruction Book showing the principles and methods used in the DSG system. 14 pages. ?5

      D21 DEAN, SMITH and GRACE: TC1, TC2, TC3 and TC4 CNC Chucker lathes. Detailed Sales and Technical Specification and Accessories Catalogue 21 pages. ?5

      D21A DEAN, SMITH and GRACE: 500TC CNC lathe. Sales and Technical Specification and Accessories Catalogue 4 pages. ?

      D38 DECKEL Model FP - the original type. 3-page advertising catalogue from the 1920s. ?

      D39 DECKEL FP1 Universal Precision Miller Early Mk. 1 with changewheels for the table feeds. Wonderful Sales and Technical Specification catalogue with cut-away drawings and examples of work in progress. The best catalogue ever produced for the FP1 - Unfortunately this rare early edition is only an average quality copy. 74 pages. ?7

      D40 DECKEL FP1 Universal Precision Miller early (Mk.2) "lever-change" model Sales and Technical Specification Catalogue. A superb Catalogue that matches the quality of the machine. 52 pages. ?7

      D40A DECKEL FP1 Universal Precision Miller later (Mk.3) "dial-change" model Sales and Technical Specification Catalogue. A superb Catalogue that matches the quality of the machine. 52 pages. ?5

      D40B DECKEL FP1, FP2, FP3, FP4, FP3L, FP3LV Universal Precision Millers Mk.4 "square-style" models. Superb and Comprehensive Sales and Technical Specification Catalogue showing all the accessories and sample jobs being machined. 62 pages. ?5

      D40B2 DECKEL FP 4M and FP1. A very late-model catalogue (possibly the last). 24 well-illustrated pages. ?9

      D40BB DECKEL FP2 Catalogue circa 1971 showing the full range of FP2 Machines and Accessories. 46 pages. ?5

      D40Z DECKEL FP3 Catalogue 1974 showing the full range of FP3 Machines and Accessories. 36 pages. ?7

      D40Z2 DECKEL FP3L Detailed and well illustrated Sales, Technical Specification and Accessories Catalogue showing the full range of FP3L Machines and 36 pages. ?0

      D40Z3 DECKEL FP4A Miller with CNC Contour 2 Control. Detailed and well illustrated Sales, Technical Specification and Accessories Catalogue. 24 pages. ?5

      D40C DECKEL Tools and Accessories. Covers the complete range of extras for a wide range of Deckel machine tools and includes: the full range of spindle-nose fittings, spindle-sleeve adaptors, taper adaptors, collets, collet holders, boring and facing chucks, extension arbors, horizontal cutter arbors, grinding wheel mounts, scribing tools, indexing heads, chucks, faceplates, vices, angular tables, clamps and cutting tools of all kinds etc. etc. 46 pages. ?5

      D41 DECKEL Die-Sinking and Engraving machines. This is the English "Alexander-badged" Model. Sales and Technical Specification Catalogue (Identical to the Deckel Models) Contains useful operating data, charts and details of accessories and how to mount them - includes two additional separate Sales and Technical Specification Sheets. 24 pages.?2

      D42 DECKEL Universal Machine Tools Manufacturing Program Catalogue (small format). Covers Engravers, Die Sinking machines, Millers and Optical Co-ordinate Machines 20 pages. ?5

      D43 DECKEL Universal Pantograph Die Sinking Machines Sales and Technical Specification Catalogue - being a comprehensive and detailed examination of the machines' construction and operation - and employment of accessories. 50 pages. ?5

      D44 DECKEL "Factory Tour". Illustrated booklet showing the factory and production methods 30 pages. ?5

      D45 DECKEL "Universal Machine Tools" Manufacturing Program" (Range Catalogue - circa 1960s). Shows the G1U, G1L, G1F, GK12, GK21, KF1 and KF12 Engravers and Die Sinkers. FP1, FP2, FP2LB, FP3 Milling and Boring Machines. LKB, LKS Optical Co-ordinate Machines and S1 Tool and Cutter Grinder. 20 pages small format. ?5

      D45A DECKEL "Universal Tool Milling and Boring Machines" - Range Catalogue 1976. Shows: FP1, FP2, FP3, FP4, FP3L, FP3LV, FP3LG, FP4L, NC Milling and Boring Machines Models E3, E3L, E3LV, C3, C3L, C3LV, V410, FP5C, V400, S500. Engraving and Copy Milling Machines Models: G1L, GK12, GK21, GK21A, KF1, KF1, KF2, KF2S, KF3S. Spark Erosion Machines Models: DE30, DE40. Optical Coordinate Jig Boring and Grinding Machines Models: LKB and LKS. Universal Tool and Cutter Grinder Models: S1, SO and SE. 20 pages. Small format. ?5

      D45B DECKEL Milling, Engraving and Grinding Machines Tools and Accessories - Complete Range Catalogue with shadow review of machine-tool range - circa 1972. 52 pages. ?5

      D46 DECKEL LK Series (LKB, LKs and LKM) Optical Co-ordinate Jig Boring and Grinding Machines with lever-operated speed change on the side of the column). very detailed,informative and well-illustrated Technical Sales and Technical Specification Catalogue. 32 pages. ?9

      * D46B DECKEL LK Series (LKB, LKs) Optical Co-ordinate Jig Boring and Grinding Machines with Dial-operated speed change on the side of the column). very detailed,informative and well-illustrated Sales, Technical Specification and Accessories Catalogue. 32 pages. ?9

      D46C DECKEL KF Series KF1, KF2 and KF2S Universal Copy Milling Machines: highly detailed,informative and well-illustrated Sales, Technical Specification and Accessories Catalogue. 58 pages. ?5

      D46C2 DECKEL Late-model KF Series KF2, KF2S and KF3S Universal Copy Milling Machines: highly detailed,informative and well-illustrated Sales, Technical Specification and Accessories Catalogue. 43 pages. ?5

      D46D DECKEL GK Series Universal Pantograph Engraving and Profile (Copy) Milling Machines: Sales and Technical Specification Catalogue. 22 pages. ?0

      D46E Deckel Engraving machines. An early well-illustrated and very detailed catalogue covering the Models: GO, G1, GiL, GF, G2, GKMO 6-spindle Engraving Machine, KP tracing and Etching Apparatus, KPM 6-spindle Etching and Tracing pantograph, , GS cutter Grinder, Stencils, Type face, Accessories including the Universal Stencil Holder, Jigging Devices, Dividing Head, Circular table, Devices for Engraving on Curved Surfaces, Circular Cutting Attachment, Cylinder and Roller Engraving Device, Special Jigging Devices and Special Machinery, Type Engraving machine, Briquette Die Engraving Machine and samples of work. 32 pages. ?9

      D47 DECKEL CNC Universal Milling and Boring Machines FPCC Series. Sales and Technical Specification Catalogue. 48 pages. ?5

      D48 DECKEL SO Tool and Cutter Grinder. Technical Sales and Technical Specification Catalogue and Basic Operating Instructions. 12 pages. ?5

      D48A DECKEL SOE Tool and Cutter Grinder. Sales and Technical Specification Catalogue 10 pages. ?5

      D49B DECKEL SO and SOE Catalogues: both together.?5

      D50 DECKEL Type templates Catalogue for Engraving Machines. 16 pages. ?0

      DECKEL "MAHO" - see under MAHO

      DELTA - see ROCKWELL DELTA section below

      D60 DELAPENA Honing Machines. A collection of Sales and technical Specification literature (mostly 4 pages per machine) for the following: "Speedhone" Junior; VHM/1, VHM1D, VHM/3C. VHM60, HHM/11, HHM/30, Model 276 Beam Stroking Honing Machine; Model 301, VHM/1, VHM/1D, VHM/3, VHM/3C, VHM/5, VHM/60 and HHM/11. 60 pages. ?7

      D60A DELAPENA Mandrels and Stones. Comprehensive Catalogue of truing sleeve, Adaptors, Wedges and Accessories for use with Delapena machines. 20 pages. ?7

      D60B DELAPENA "Manually-operated Industrial Honing Equipment" and "Heavy-duty Precision Honing Units (two catalogues). Honing Heads, Stones, Stone Carriers, Stone Supports, Universal Joints, Line Hone, Specials, Cylinder Gauge, Fluids, etc. 24 pages. ?7

      DEMCO Australia - see also SHERATON for lathe listings

      D65 DEMCO 24-inch Shaper. Sales and Technical Specification Catalogue. 4 pages. ?0

      D70 DEMOOR (Belgium) Lathe Types 824, 825 and 827 Sales and Technical Specification Catalogue 16 pages. ?5

      D80 DENBIGH "Machine Tools" Full-range catalogue of milling machines, drills, lathes, fly presses, foot-lever presses, couplings, moulding machines, polishing and grinding spindles, tool grinders. Published circa 1920s. 42 beautifully illustrated pages. ?5

      D80A DENBIGH Model "M" (light) Milling Machine: Sales and Technical Specification Catalogue. 4 pages. ?

      D80AA DENBIGH Milling Machine: 3 Sales and Technical Specification Catalogues listing the model range. 12 pages. ?2

      D80B DENBIGH Model J.P.V.S. Horizontal Milling Machine. Sales and Technical Specification Catalogue. 4 pages. ?

      D80C DENBIGH Model "D" Milling Machine: Sales and Technical Specification Catalogue. 4 pages. ?

      D80E DENBIGH Model Flypresses: Sales and Technical Specification Catalogue. 1 pages. ?

      D80F DENBIGH K3 and K2 Series 2 Pillar and Bench Drilling Machines, Sales and Technical Specification Catalogue. 1 pages. ?

      D80G DENBIGH 1.5" and 2" self-contained Bench-mounted Drilling Machine. Sales and Technical Specification Catalogue. 2 pages. ?

      D80H DENBIGH 7/8" capacity K.I.A. Series 2 self-contained Pillar Drill. Sales and Technical Specification Catalogue. 1 pages. ?

      D80J DENBIGH No. 1 Pillar Drill with fine and lever feeds. Sales and Technical Specification Catalogue. 2 pages. ?

      D80K DENBIGH 20-inch Pillar Drill with fine and lever feeds. Sales and Technical Specification Catalogue. 2 pages. ?

      D80L DENBIGH Type VSa VARIABLE-SPEED BENCH AND PILLAR DRILLS. Sales and Technical Specification Catalogue. 2 pages. ?

      D80Y DENBIGH Foot-operated lever press. Sales and Technical Specification Catalogue. 1 pages. ?

      D80Z DENBIGH "Swiftcut" 2-speed Metal Hacksaw. Sales and Technical Specification Catalogue. 1 pages. ?

      D100 DENHAM Lathes Full-Range Catalogue circa 1930s and 1940s. 84 pages. ?5

      D100A DENHAM 4.5" and 5" Junior Lathe: Sales and Technical Specification Catalogue 4 pages. ?

      D100B DENHAM Lathes and Slotters: Full-range Catalogue: 8.5" tool-room lathe, 6.5" lathe, 8.5" gap-bed lathe, 9.5" lathe, 6.5" slotter, 26 pages. ?5

      D100C DENHAM BV28, BV32, BV36, SR8V, SR10V, SR18V and SR20V Post-War Lathes. Sales and Technical Specification Catalogue. 24 pages. ?5

      D100D DENHAM SR10V Sales and Technical Specification Catalogue. 6 pages. ?2

      D105 Deber Milling Machines Sales, Technical Specification and Accessories Catalogue for the Models FU1, FU2, FU180M, US120, US140, FBF 2000, FBF 2500, FBF3000, Maxim P and STAMP. 24 pages. ?9

      D112 DERBYSHIRE (USA) Precision Watch and Clockmaker's Lathes and Micromills: complete Catalogue early 1940s (red cover). This is the version with 46 extra inserted plate photographs. 62 pages. ?5

      D112A DERBYSHIRE Precision Watch and Clockmaker's Lathes, Micro Drill and Micromills: Complete Catalogue late 1940s and 1950s products (red cover). 52 pages. ?9

      D112B DERBYSHIRE Precision Watch and Clockmaker's Lathes and Micromills: Complete Catalogue 1956. 80 pages. ?5

      D112C DERBYSHIRE Precision Watch and Clockmaker's Lathes, Micro Drill and Micromills: complete Catalogue 1960s products (green cover). 47 pages. ?9

      D112D DERBYSHIRE Precision Watch and Clockmaker's Lathes and Micromills: complete Catalogue 1970s and 1980s products (green cover). 47 pages. ?9

      D112E DERBYSHIRE Lathes Type 750, Model A and Models 460 (flange-mounted motor) Sales and Technical Specification Catalogue. 20 pages. ?0

      D112F DERBYSHIRE - all the above five Catalogues giving a complete picture of the company's products and enabling identification of rare and unusual accessories. 127 pages. ?5

      D116 DEUTSCHLAND DORTMUND (G.M.B.H. Maschinenfabrik Deutschland Aktiengesellschaft Dortmund) Heavy Lathes. Detailed, interesting and well-illustrated Sales and Specification Catalogue. Shows the Types D11, D111, D1V lathes and their various sub-groups, DBD and DP Facing Lathes, DWS and DWv Roll Turning Lathes and the DRK, DRG, DRL and DRP Wheel Lathes. Includes a second explanatory catalogue with details of the lathes' design and construction. English, French and German text. 50 pages. ?5

      D120 DeVlieg Spiramatic Jigmils. Two early catalogs circa 1940s showing the models 3B and 5B with detailed and well-illustrated descriptions of a Jigmil's function, accessories and capabilities. 36 detailed pages.?5

      D120A DeVlieg Spiramatic Jigmils. Two catalogs from the early and mid-1950s with highly detailed and well-illustrated descriptions of a Jigmil's function, accessories and capabilities. 48 detailed pages. Covers the Models 3B, 4B, 3C and 4C. 48 pages. ?5

      D120B DeVlieg Jigmils. Accessories Catalog. Rare publications showing the options and accessories. 14 detailed pages. ?7

      D120C DeVlieg Spiramatic Jigmil 2B, 3H, 4H and 5H. Sales and Technical Specification Catalog with Accessories and details of the Herbert Datatrol Controls (dated 1959) 38 detailed pages. ?5

      D120D DeVlieg Spiramatic Jigmils late 1960s Models 2B-36, 3H-48, 3H-72, 43H-48, 43H-72 and K Series. Sales and Technical Specification Catalog with Accessories: 18 detailed pages. ?9

      D120E DeVlieg Spiramatic Jigmil 2B, 3B and 4B with Micropoint Tool & Cutter Grinder. Sales and Technical Specification Catalog with Accessories. 24 detailed pages. ?9

      D120F DeVlieg Spiramatic Jigmils. Three catalogs for the Types H, Types J and Types K. Sales and Technical Specification Catalogues with Accessories. 30 pages. ?9

      D120G DeVlieg Spiramatic Jigmils Type R. Sales and Technical Specification Catalogue dated 1988. 6 pages. ?7

      D120H DeVlieg/Okuma Horizontal & Vertical Machining Centres and DeVlieg Vertical Double-column Machining Centres. Technical Specification Catalogues dated 1984. 12 pages. ?7

      D135 DIAMOND Milling Machines USA. Sales and Technical Specification catalogue (+ Sales and Technical Specification Sheet 22-M), with the B-12, M-24 and M-20 machines. 5 pages. ?2

      D140 DIMCO 175, 225 and 225 (Duplicator) lathes. Sales and Technical Specification Catalogues. ?7

      D142 DIXI Precision Lathe. Sales, Technical Specification and Accessories Catalogue - French Text. 16 pages. ?5

      D142A DIXI 3S Jig Borer. Two Sales, Technical Specification and Accessories Catalogues (English text). 12 pages. ?0

      D142B DIXI Model 60 Jig Borer. Two Sales, Technical Specification and Accessories Catalogues (English, German and French text).24 pages. ?7

      D142C DIXI 75, 75-N, 75-OP. 75-OG, 75-AP, 75-AG, 75-ON, 75-AN Jig Borers. Two Sales and Technical Specification and Accessories Catalogues(English text).38 pages.

      D142E DIXI 450P Precision Optical Rotary table. Technical Specification and Catalogues (English text) 4 pages. ?

      D142F DIXI General Catalogue circa 1976 showing the following models and their variants: Model Dixi 200, Model 300 (Dixi 3S), Dixi 210, Dixi 350, Dixi 400, Dixi 500 (Dixi 5S) with details of the Controls, Dixi CNC 2200, CNC 440, Automatic Tool Holders, Tool Changers ATC50 85 and 144 and the Pallet Changer. 16 pages. ?5

      D142G DIXI Horizontal Optical Jig Borers Models 3S, 75F, 75M, 5S and the Dixi Vidimatic Control System. 12 pages. ?0.

      D142H Dixi Horizontal Jig Borer Models 400, 410E and 415 High-precision Machining Centre. Detailed and well-illustrated 20-page Sales and Technical Specification Catalogue. ?9

      D145 DoALL 15-inch Lathe. Sales and Technical Specification and Accessories Catalogue (a re-badged Harrison 15-inch): 6 pages. ?5

      D145A DoALL 17-inch Lathe. Sales and Technical Specification and Accessories Catalogue (a re-badged Harrison 15-inch): 6 pages. ?5

      D150 Dominion Woodworking Machinery. Full-range Catalogue and Price lists. Covers the: Radial Arm Crosscutting and Trenching Machine Type F.K.; Combined Chain and Chisel Mortiser Type D.P.A., B.A.A. and B.M.;Under and Over Pad Belt Sanding Machine Type D.D.A.; Sawbenches Type EKA, EF, AN, Et and AJ; Single Ended Tenoning and Scribing Machine Type BX. 40 Pages ?7

      D150B Dominion Catalogue collection as issued to agents - beautifully illustrated. Covers: Wood lathes, Mortising Machines, 24" x 9" Panel Planer and Thicknessing machine, 14", 24" and 30" Bandsaws, Planer and Moulding Centre Cutter Grinding Machine Type BY, 6" "Handy" Surfacing Machine, 12" Surfacing, Jointing and Moulding Machine Type BP (with thicknessing Attachment), ,12" x 7" Surfacing and Thicknessing Machine Type ES, 12" x 7" Panel Planer and Thicknessing Machine Type EV, Cross-cutting and Trenching Machines, 16", 20" and 24" x 9"Surfacing and Thicknessing Machines Type DA, Open End Belt sanding machine Type DD, Belt Sanding Machines in 9", 12" and 14" sizes, Tennoning Machine Type BX, Tennoning Machine Type DZ, Saw Benches 16" to 38" Types EK, EF, AN, ET, AV, andAJ, Dovetailing Machine Type BK, Spindle Moulders Type BC, DV, and "The Handy", Cutting Gear Sets, Twin Wedgelock Cutterheads and a general Price List, etc.73 pages. ?5

      D150C Dominion Wood Lathes Catalogue Collection covering all models: two catalogues covering the early and late versions of the Types A.L. and A.L.Y. Nos. 1, 1a, 2, 2a, 3a (with 6 and 8-inch centre heights), a catalogue for the 6-inch F.J.A and another for the underdriven 5-inch "Handy". 24 Pages. ?2

      D150D Dominion Multi-function Woodworking Machines. Sales and Specification Catalogue. 9 Pages ?5

      D150E Dominion Bandsaws Types DNA, AKA and EN. Sales and Specification Catalogue. 12 Pages ?8

      D150F Dominion FK Radial-arm Crosscutting and Trenching Machine, DPA Combined Chain and Chisel Mortiser, BAA Combined Chain Mortiser with Hollow Chisel Attachment, DAA 6-inch Under and Over Pad Belt Sanding Machine, Sawbenches Types EKA, EF, AN, ET and AJ and Single Ended Tenoning 7 Scribing Machine Type BX. Sales and Specification Catalogue. 42 Pages ?5

      D150G Dominion AY UNIVERSAL WOODWORKER (also badged "Elliot"). Sales and Specification Catalogue. 8 Pages ?5

      D152 DORMAC Millers Size 1 and 2. Sales, Specification & Accessories Catalogues. 10 pages ?0

      D155 DORMER Machine Tools. Full-range Catalogue giving details of the Model 108 Drill Sharpener, Model 100 Semi-Automatic Drill Sharpener, Model 48 Drill Point Thinning Machine, Model 94 Goniometer Drill Inspection Unit, Model 53 Profile Tool & Cutter Grinder. Text in English, French, German, Italian & Spanish. 12 pages. ?7

      D155A DORMER S.P.V. Slimline Tap Drivers catalogue. Full specifcations of the GS-8, GS-12, GS-24, GSK-8, GSK-12 & GSK-24. 8 pages ?5


      D160 DOUGLAS 10.5-inch SHAPER (Australia). Sales and Technical Specification Sheet. 2 pages. ?

      D170 DOWDING (DOWDING and DOLL) V4 Universal Gear Hobber: Sales and Technical Specification Catalogue. 10 pages. ?2

      D170A DOWDING (DOWDING and DOLL) Accuratool Capstan Lathes. Comprehensive and well-illustrated Sales and Technical Specification Catalogue (not a manual)for the lighter 5/8" and 13/16" versions. 8 pages. ?2

      Many other Dowding and Doll Catalogues are available. Please enquire.

      D176 DOWLING Machine Tools. A useful Catalogue collection comprising: Model 242 Pantograph Engraver, Model 303 Bench Panel Pantograph Engraver, Model 713 Pantograph Engraving Machine, Model 848 Pantograph Engraving Machine, Engraving Cutter Grinder Model 595, Bench Type Swivelling Head Tool and Cutter Grinder, Models 858A and 595 Engraving Cutter Grinders, Model 858 Engraving Cutter Grinder, Universal Tool and Cutter Grinder, Model C Tapping Machine, Type faces Illustrations. 21 pages ?5

      D180 DOWNHAM Precision Jig Borer and Drilling and Milling Machine Sales and Technical Specification Catalogue. (A copy of the American "Linley" machine.) Sales and Technical Specification Catalogue. 4 pages. ?

      D200 DRILLSPRINT 500: Operators Manual and Parts as Exploded Component Drawings. ?5

      D210 DROOP and REIN. Magnificent 102-page full-range Milling Machine Catalogue from the 1970s showing aspects of the factory, operating methods of the millers, numerous machining examples and typical installations in various factories. Includes an interesting priced example for a Model FS.130-NB with Plessey CNC Control. ?25

      D210A DROOP and REIN Copy Milling machines. Detailed and well-illustrated Whole-range Sales and Specification Catalogue from the 1960s. 102 pages. ?25

      MD550G DRUMMOND Lathes: No Proper Manual was ever published for the early belt-drive Drummond lathes, but there is an interesting collection of Sales and Specification material below - including screwcutting charts and instructions for adjusting the headstock bearings on the Model M - that can be bought as a single package at a substantial discount. See D224X below

      D244D Round Bed Drummond. No manual was ever issued but the following complete Data Pack is available:
      Drummond 4" Type A Round-Bed Lathe: Sales Booklet. 12 pages.
      Drummond: Special Attachments and Accessories for Type A Round-Bed Lathes. 12 pages. 
      Drummond: "Lathe Work". An interesting Works Booklet showing examples of Models and other projects by amateurs demonstrating the versatility and capacity of the Flat and Round-bed lathes.
      Also included are both pre and post-1925 screwcutting and feed charts. 24 pages ?7

      D244 DRUMMOND: Hints to Purchases of Lathes (1920 - text only). 19 pages. ?2.

      D244A Drummond: Very early Catalogue for 3.5" Model B flat-bed lathe. 8 pages. ?2

      D244C Drummond Very early lathes: Full-range Catalogue. 45 pages. ?0

      D244CA Drummond 1921 3.5-inch Model A. Sales and Specification Catalogue. 12 pages plus 2-page letter from the makers. ?2

      D244E Drummond: Special Attachments and Accessories for Type A Round-Bed Lathes. 12 pages. ?2

      D244F Drummond M Type Lathe (31/2" flat bed): Sales and Specification Booklet (1930 - 1942 Model). Contains details of the essential headstock bearing adjustment technique. 12 pages. ?2

      D244G Drummond/Myford M Type lathe: The "transition" booklet when Myford took over manufacture in 1942. 12 pages. ?2

      D244H Drummond M Type Lathe: Special Attachments and Accessories Catalogue. 16 pages. ?2

      D244J Drummond: "Lathe Work". An interesting Works Booklet showing examples of Models and other projects by amateurs demonstrating the versatility and capacity of the Flat and Round-bed lathes. 24 pages. ?5

      D244K American Drummond Catalogue showing flat and round-bed models and accessories. 1912-1921 Models. 10 pages. ?5

      D244X All the Drummond literature above (concerning the smaller lathes) 196 pages. ?5.

      D244B Drummond Mk,1 Model A (flat bed model with leadscrew down centre of bed) useful set of 30 dimensioned drawings showing most parts. ?5

      D244K Drummond "J" Type Hand Bench Shaper: Sales and Technical Specification Catalogue. 4 pages plus covers. ?2

      D244L Drummond "L" Type Hand Drill: Sales and Technical Specification Catalogue. 4 pages. ?

      D244M Drummond T Type 5-inch, 6-inch and 7-inch Lathes Sales and Technical Specification Catalogue: Sales and Technical Specification Catalogue. 12 pages. ?2

      D244N Drummond T Type 5-inch, 6-inch and 7-inch lathes Special Attachments and Accessories. 16 pages. ?2

      D244P Drummond: Lists of Changewheels and Screwcutting Charts for models "A" Round Bed and "B" 3.5" Flat Bed. free with any of the above. ?
      D244PG Drummond "Little Goliath" Sales Catalogue. Showls the lathe with its foot-motor drive system and all the various accessoies. 4 pages. ?
      D244R Drummond: The complete set of all Drummond literature: on CD ?0 or as a high-quality bound print ?5.

      DSG Lathes - See Dean Smith and Grace

      D260 DUBIED 514 Hydraulic Copying Lathe (Switzerland). two separate catalogues: 1) Sales and Technical Specification and 2) Accessories (the latter covering the Models 514 and 515). 36 pages. ?5

      D267 DUFF (USA) Ram Turret Vertical Milling Machine Sales and Technical Specification Sheets showing standard and variable-speed drive models. 4 pages. ?

      D290 DUFOUR (Gaston Dufour) 51 Milling Machine. Sales and Technical Specification Catalogue. 12 pages. ?0

      D290A DUFOUR (Gaston Dufour) 53 Milling Machine. Sales and Technical Specification Catalogue. 6 pages. ?5

      D290B DUFOUR (Gaston Dufour) 59 Milling Machine. Sales and Technical Specification Catalogue. 6 pages. ?5

      D290C DUFOUR (Gaston Dufour) 61 Milling Machine. Sales and Technical Specification Catalogue. 6 pages. ?5

      D290D DUFOUR (Gaston Dufour) 62 Milling Machine. Sales and Technical Specification Catalogue. 6 pages. ?5

      D290E DUFOUR (Gaston Dufour) 101, 130 and 160 Milling Machines. Sales and Technical Specification Catalogue. 8 pages. ?6

      D290F DUFOUR (Gaston Dufour) F-164 Milling Machine. Sales and Technical Specification Catalogue. 6 pages. ?5

      D290G DUFOUR (Gaston Dufour) F-195 Milling Machine. Sales and Technical Specification Catalogue. 6 pages. ?5

      D290H DUFOUR (Gaston Dufour) 221N and 221R Milling Machines. Sales and Technical Specification Catalogue. 12 pages. ?0

      D290J DUFOUR (Gaston Dufour) 223 and 230 Milling Machines. Sales and Technical Specification Catalogue. 10 pages. ?0

      D290K DUFOUR (Gaston Dufour) 225, 231 and 250 Milling Machines. Sales and Technical Specification Catalogue. 14 pages. ?5


      D290M DUFOUR (Gaston Dufour) 302 Milling Machine. Sales and Technical Specification Catalogue. 10 pages. ?0

      D290N DUFOUR (Gaston Dufour) 624D and 624C Precision Milling Machines. Two Sales and Technical Specification Catalogues. 18 pages. ?5

      D290P DUFOUR (Gaston Dufour) CS2531 Milling Machine, Programme type. Sales and Technical Specification Catalogue. 16 pages. ?5

      D290Q DUFOUR (Gaston Dufour) CS2533 Milling Machine, Programme type. Sales and Technical Specification Catalogue. 12 pages. ?0

      C/D600 DUNLAP/CRAFTSMAN/COMPANION (USA): compilation of all 86 pages from the Craftsman Catalogues, which show metal and wood lathes. Covers: 1929, 1930, 1932, 1933, 1935, 1936, 1937, 1938, 1939, 1940, 1941, 1942 and 1943 - when the Catalogue was withdrawn.. 86 pages ?5 on CD-ROM only.

      C/D601 DUNLAP/CRAFTSMAN/COMPANION post World War 2 Lathes, Millers and Shapers: compilation of every page showing these machines. Includes the first post war Catalogue of 1948, then 1949, 1950, 1952, 1953, 1954, 1955, 1957 and 1960/61 ?5 on CD-ROM only

      D700 DYNAFILE 55-L (Seco Engineering) Operating and Repair Instructions. ?0

      E20 EAGLE SURFACE GRINDERS: Sales and Technical Specification Catalogue for the early and late Standard and Heavy Duty Models 1, 2, 2a, 3, 3A, 4, 4A, 5, 6; the Model 534 in Mk.1 and Mk.2 versions and a price list. This collection represents the complete data set for these machines. 13 pages. ?6

      E60 EDELSTALL: for Emco models, see the Emco section below

      E65 EDGAR (Holbrook) lathes. Well-illustrated Sales and Specifications Catalogues Two editions covering both the small and larger versions of the lathe and complete with screwcutting charts. 23 pages. ?7

      E70 EDGWICK 6.5-inch Lathe Mk.2. Sales and Technical Specification Catalogue. 12 pages. ?5

      E80 Eguro Precision Lathes and Milling Machines: Sales and Technical Specification for the Lathes models EL-2, EL-3, PH6L-3 and Milling Machines Models TF-5 and TF-6. 16 pages ?7

      E90 ELB Surface Grinders. Full-range Catalogue 1958. 40 pages. ?7

      E90A ELB Surface Grinders. Full-range Catalogue 1960s. 90 pages. ?5

      E90A ELB Surface Grinders. Full-range Catalogue 1977. 84 pages. ?5

      E95 ELGIN Machine Tools circa 1920 and 1930. Beautiful full-range Catalogue showing the range of precision bench lathes together with all their accessories and countershafts, a bench grinding machine, grinding head, and tapping and drilling machines. Includes full screwcutting charts for the threading attachment.76 pages. ?5

      E95A ELGIN Machine Tools circa 1940s and 1950s. A collection of literature comprising: Horizontal Bench Miller Catalogue (4 pages), a 4-page folder showing the Elgin Lens Polishing Machines, Precision Bench Lathes types CB-5C, 4EV, lathes on pressed steel pedestals, pressed steel base with laminated top and steel frame benches with laminated wood tops, and Horizontal and vertical milling machines. Vertical Bench Miller Sales and Technical Specification Sheets, Lathes and Millers Catalogue (4 pages) plus price lists. 20 pages in total. ?5

      E95B All the above Elgin literature: ?0

      ELLIOTT - we have a vast collection of Elliott Sales and Technical Specification Literature in addition to those listed below: Please e-mail your requirements :tony@lathes.co.uk



      E103 ELLIOTT Full-range General Catalogue. Lathes, Millers, Shapers, Grinders, Drills, Bandsaws, Hacksaws, Punch and Shearing Machines, etc. (1960s) 39 pages. ?5

      E104 ELLIOTT lathe: "CARDIFF" Major Lathe Beautifully illustrated Catalogue showing speed change lever positions and full English and Metric Screwcutting charts. 15 pages. ?0

      E104A Elliott Lathe: Cardiff 7.5" and 8" Lathe Sales and Technical Specification Catalogue 2 pages. ?

      E104B Elliott Lathe: Prefect, Crusader and Senior 17", 18" and 22" swing Lathes (larger examples of the "Cardiff" design) 4 pages. ?

      E104C Elliott Lathes 9.25" and 11" (18.5-inch and 22-inch swing): Sales and Technical Specification Catalogue with useful screwcutting gearbox chart (often damaged on these lathes). 12-pages. ?0

      E104D All the above Elliot Lathe Catalogues - ?5

      E104D Elliott Lathe: OMNISPEED. Catalogue. 12 pages. ?5

      E4E Elliott Lathe: OMNITURN PRODUCTION. Catalogue. 8 pages. ?5

      E104F Elliott Lathe: OMNITOOL PRECISION. Catalogue. 8 pages. ?5

      E4G Elliott Lathe Model 1L. Catalogue. 4 pages. ?

      E104H Elliott Lathe CONCORD 460. Sales and Technical Specification Catalogue. 4 pages. ?

      E106 Elliott General Purpose Toolroom and Production Machines. (Catalogue x 2) 5 pages. ?

      E108 ELLIOTT Shaper 10M (Alba): Sales and Technical Specification sheet 4 pages. ?2

      E108A ELLIOTT Shaper 14M, 18M, 24M (Alba): Sales and Technical Specification Catalogue 4 pages. ?2

      E108B ELLIOTT Shaper (ALBA) Model: Sales and Technical Specification sheet 2 pages. ?

      E108C ELLIOTT Shaper (ALBA) Model: Sales and Technical Specification sheet 2 pages. ?

      E108D ELLIOTT Shaper (ALBA) Models (S Series) S14, 18S and 24S: Sales and Technical Specification Catalogue. 4 pages. ?2

      E108E ELLIOTT Shaper (ALBA) Models MR. Sales and Technical Specification Catalogue 4 pages. ?2

      E108F ELLIOTT Shaper (ALBA) "Major" Series 18", 24" 30". Sales and Technical Specification Catalogue 4 pages. ?2

      E108K ELLIOTT Planer HYDETSCO 100, 150, 300 and 400 series. Technical Sales and Technical Specification Catalogue 16 pages. ?5

      E110 Elliott JIG BORER Co-ordinate drilling and Milling Machine. Technical Sales and Technical Specification Catalogue. 4 pages. ?0 E111 Elliott Miller 00 Omnimill and 181 Turret: Sales and Technical Specification Catalogue. 8 pages. ?2

      E111A Elliott Millers 01 and 02 Omnimill Turret: Sales and Technical Specification Catalogue 4 pages. ?2

      E11B Elliott Miller "Rapidmill Series" Plain, Universal and vertical. Sales and Technical Specification Catalogue. 12 pages. ?6

      E111C Elliott Miller "Rapidmill No. 2" Sales and Technical Specification Catalogue.2 pages. ?

      E111D Elliott Miller 70 Series: Sales and Technical Specification Catalogue 1963. 35 pages. ?5

      E111E Elliott Miller MILMOR Turret: Sales and Technical Specification Catalogue 22 pages. ?5

      E111F Elliott Miller Universal Model "UO". Sales and Technical Specification Catalogue 4 pages. ?

      E111G Elliott Millers Models P1, U1, V1, P2, U2 and V2 Universal Plain and Vertical: Sales and Technical Specification Catalogue. 8 pages. ?6

      E111H Elliott Millers STURDIMILL 1100 and 1500: Sales and Technical Specification Catalogue. 18 pages. ?5

      E111J Elliott Millers STURDIMILL 1250 and 1500: Sales and Technical Specification Catalogue. 6 pages. ?2

      E111K Elliott Millers STURDIMILL 1100 and 1100R: Sales and Technical Specification Catalogue. 2 pages. ?

      E111L Elliott Miller STURDIMILL OMNIMILL: Sales and Technical Specification Catalogue. 4 pages. ?

      E111M Elliott Miller Model M1 Horizontal and vertical: Sales and Technical Specification Catalogue. 16 pages. ?5

      E111Z Elliott Miller TR1, TV1 and TV2 Hydraulic Copy Millers. Sales and Technical Specification Sheet. 2 pages. ?

      E111N Elliott Milling Accessories 7 pages. ?

      E111P Elliott Milling RACK DIVIDING ATTACHMENT. Technical; Sales and Technical Specification Sheet. 2 pages. ?

      E112 Elliott 2G and 2GS 10-speed Drills (also branded Progress) . Sales and Technical Specification Catalogue with cut-away section of the head gearing. 3 pages. ?

      E112A Elliott 3E, 4E and 5E Drills (also branded Progress): Sales and Technical Specification Catalogue. 8 pages. ?2

      E112B Elliott 3A Drill (also branded Progress): Sales and Technical Specification Catalogue. 4 pages. ?2

      E112C Elliott DC3 and DC4 Radial-arm Drills (also branded Progress): Sales and Technical Specification Catalogue. 4 pages. ?2

      E112C Elliott 1 and 1S Drills (also branded Progress) Models: Sales and Technical Specification Catalogue. 4 pages. ?2

      E112D Elliott 16 and 16S Drills (also branded Progress) Models. Sales and Technical Specification Catalogue. 4 pages. ?2

      E113 Elliott Surface Grinder Model "ELLIOTT / BURDETT 24" x 8": Sales and Technical Specification Catalogue. 4 pages. ?0

      E113A Elliott Surface Grinder Model 20 x 8. Sales and Technical Specification Catalogue. 8 pages. ?2

      E113B Elliott Surface Grinder Model 921: Sales and Technical Specification Catalogue. 16 pages. ?0

      E113C Elliott Surface Grinder 1018 precision Toolroom: Sales and Technical Specification catalog 2 pages. ?

      E113C Elliott Surface Grinder 925: Sales and Technical Specification Catalogue 2 pages. ?

      E113C Elliott Surface Grinder 616 and 1018: Sales and Technical Specification Catalogue 16 pages. ?5

      E113D Elliott Tool and Cutter Grinder Model 5: Sales and Technical Specification Catalogue. 12 pages. ?5

      E230 Emco Unimat - first known (and almost certainly the first ever) English Language catalogue dated 1954. 6 pages showing the first crackle-black models and their accessories. ?2

      E230A EMCO DB200 /Unimat SL1000 USA Sales and Technical Specification Catalogue (early) with detailed technical specifications and illustrations of accessories. 4 pages. ?0

      E230B EMCO DB200 /Unimat SL1000 USA Catalogue with detailed technical specifications and illustrations of accessories. 15 pages. ?5

      E230C EMCO DB200 /Unimat SL1000 USA Accessories Catalogue (repeat information) 6 pages. ?0

      E230D EMCO UNIMAT SL1000/DB200 British Sales and Technical Specification Catalogue with detailed technical specifications and illustrations of accessories. 6 pages. ?0

      E230E EMCO SL1000/DB200 early British Market Handbook 28 pages. ?5

      E230F EMCO UNIMAT SL1000 British market HANDBOOK and Parts' LIST. Later version, A4 size, with 48 well-illustrated pages covering the lathe and its accessories in great detail. Full explanatory texts with clear diagrams of how to get the best from the lathe and its attachments. Exploded Parts' diagrams of the lathe and every accessory. 48 pages. ?2

      E230G EMCO DB200 /UNIMAT American market HANDBOOK (46 pages) copiously illustrated. Describes in detail how to use the lathe and its accessories. 46 pages. ?2

      E230H Emco SL1000 and DB200 DATA PACK. Above the above EMCO SL1000/DB200 items. These give the complete range of information about the lathes. ?5

      E238 Emco Unimat PC Sales and Technical Specification Catalogue with detailed technical specifications and illustrations of accessories. 12 pages. ?5

      E240 EMCO Unimat 3 Catalogue with detailed technical specifications and illustrations of accessories. 10 pages. ?2

      E242 EMCO Compact 5 Catalogue with detailed technical specifications and illustrations of accessories. 10 pages. ?0

      E244 EMCO Compact 8 Sales and Technical Specification Catalogue with detailed technical specifications and illustrations of accessories. 5 pages. ?0

      E245 EMCO Maximat 8V Lathe and Milling Head and Accessories Sales and Technical Specification Catalogue 6 pages. ?0

      E246 EMCO "Emcomat" 8.4 and 8.6 Sales and Technical Specification Catalogue with detailed technical specifications and illustrations of accessories. 6 pages. ?0

      E246A EMCO "MAXIMAT" V8 (lathe and miller combination marketed by Edelstal) Sales and Technical Specification Catalogue with detailed technical specifications and illustrations of accessories. 6 pages. ?0

      E247 EMCO Compact 10 Catalogue with detailed technical specifications and illustrations of accessories. 14 pages. ?2

      E248B EMCO Maximat V10P Sales and Technical Specification Catalogue (with milling head) comprehensive technical and accessories Catalogue 16 pages. ?5

      E250 EMCO "Maximat" Universal Machine Tool Series 2000 (lathe and miller combined), 1958. A very early and rare Emco Sales and Technical Specification Catalogue with detailed technical specifications and illustrations of accessories.. 6 pages. ?2

      E252 EMCO "Maximat" Universal Machine Tool Series 3000, 1962. The next stage in Maximat development - a larger and more robust machine. Sales and Technical Specification Catalogue with detailed technical specifications and illustrations of accessories.. 8 pages. ?5

      E254 EMCO Maximat SUPER 11 (with milling head) with detailed technical specifications and illustrations of accessories. 20 pages. ?5

      E256 EMCO Maximat V13 Sales and Technical Specification Catalogue with detailed technical specifications and illustrations of accessories. 8 pages. ?

      E258 EMCO Maximat V13 Catalogue (with milling head) with detailed technical specifications and illustrations of accessories. 18 pages. ?6

      E262 EMCO DB-5 wood Lathe Sales and Technical Specification Catalogue with detailed technical specifications and illustrations of accessories. 4 pages. ?

      E262A EMCO EMCOSTAR Universal Woodworking Machines. Sales and Technical Specification Catalogue. 12 pages. ?0

      E264 EMCO "Emcoturn"120/120P CNC slant bed Catalogue with detailed technical specifications and illustrations of accessories. 17 pages. ?5

      E266 EMCO General CNC Catalogue 100/120/140/220/240/320/340/360/Compact 5 CNC/F1-CNC mill CNC Training system/etc. with detailed technical specifications and illustrations of accessories. 21 pages. ?5

      E268 EMCO FB-2 Miller Sales and Technical Specification Catalogue with detailed technical specifications and illustrations of accessories. 6 pages. ?0

      M49 EME (E.M.E.) MENTOR Vertical Milling Machines (4-speed Emco millers, as marketed by the Elliott Group under the E.M.E. brand name and two Taiwanese machines also re-badged)). Sales and Price-list Sheet. 6 pages. ?0

      E270 EMPIRE Lathe 6-inch (by B. Elliott). Sales and Technical Specification Catalogue. 4 pages (Mk.1 and Mk.2 versions) ?0

      E276 EMWEE Type PR8 Turret Lathe. Sales and Technical Specification Catalogue. 4 pages + 4 pages of UK distributor's information. ?5

      E278 ENCO 4-way and 12-position Quick-change toolpost, self-indexing toolpost, 4-way toolpost to mount on the cross slide and replace the lathe top slide, cross-slide hexagon turrets. tailstock turrets, bed-mounted hexagon turrets, rotating centers, magnetic bases, etc. Very detailed, well-illustrated catalog with listing of all sizes, dimension charts and fittings, cut-though drawings, etc. 24 pages.

      E280 ENERGY VM-25 vertical Miller (Arboga copy). Sales and Technical Specification Catalogue. 4 pages. ?2

      E290 ENSHU Vertical Milling Machines 1950s - 1960s (Japanese). Sales & Specification Catalogue. 4 pages ?2

      E300 ENSIGN (Elliott of England) 13-inch "slant-bed Lathe" Sales and Technical Specification Catalogue with detailed technical specifications and illustrations of accessories. 6 pages. ?5

      E305 ERIKSEN Lathes (Alfred Erikson, Hamburg, Germany): Catalogue set for the Palermo, Kreta and Emato Models of the 1950/60s Models: 180NE, 200N, 200NE, 180DN, 200DN, 220EF, 250EF, 300EF, 350EF, 220EFE, 250EFE, 300EFE, 350EFE and 50/200Rv. 26 pages ?0

      E310 ERIKSSON of Sweden. High-speed Toolroom Lathe Type S, "Tormatic" Copying Lathe and Type S Capstan Versions. Sales and Technical Specification Catalogue 9 pages. ?5

      ESCO - See also Hahn and Kolb

      E320 ESCO Escomatic D2 and D4 Coil-fed Automatic lathe. Sales and Technical Specification Catalogue. 14 pages. ?6

      E320A ESCO Escomatic D6 and D6R Automatic lathes. Sales and Technical Specification Catalogue. 8 pages. ?2

      E330 ESEWAY Hardness Testers. Complete and detailed Full-range Sales and Technical Specification Catalogue showing the machines for testing methods including, Rockwell, Rockwell Superfical, Brinell and Vickers with details of how the test methods are conducted, technical data for the testing methods and and shwowing Models including; AS, LAS, ASW, LASW, AR, LAR, ARW, LARW, ARBW, ALRBW, S, LS, SW, LSW, R2, LR, RW, LRW,RBW, LRBW, ER, ELR, ERW, ELRW, ES, ELS, ESW, ELSW, ERBW, ELRBW, APR-3, SPLV-2 Vickers, SPVS-2 Semi-Automatic Vickers/Rockwell Superfical, SPV-2 Semi-Automatic Vickers, SPVR-2 Vickers/Standard Rockwell, SPVRB-2 Semi Automatic Vickers/Standard Rockwell Method Brinell Tester, V10 and V30 Single load Vickers, V5-10-30 Semi-Automatic Vickers, 09B Brinell, FLV-10, FVL-30, DIGITAL Testers Models DR, DLR, DRW, DLRW, DS, DLS, DSW, DLSW, DGLRW, Dynamic Hardness Tester, Portable Dynamic Hardness Testers and the Micro-Hardness Tester MV-3. 80 pages. ?5

      E340 Essex No.18 Bandsaw. Detailed Sales & Technical Specification Catalogue for this toolroom-class Bandsaw. 4 pages ?2

      E340A Essex No.32 Punch Shaper. A highly detailed and well illustratedSales & Technical Specification Cataloge that is almost an operation handbook. 16 pages ?5

      E420 ETA "Economic" Sales and Technical Specification Catalogue with detailed technical specifications and illustrations of accessories. 4 pages. ?2

      E422 EW Lathe. Collection of Sales and Technical Specification Catalogue pages. 8 pages. ?2

      E850 EXACTA Capstan Lathe. Sales and Technical Specification Catalogue pages. 4 pages. ?2

      E900 EXCEL (Victoria) Miniature Jig Borer Model "0" (identical to the BCA Mk.2) Sales and Technical Specification Sheet. 2 pages. ?

      E900A EXCEL (Victoria) Lathe Precision Plain Turning Model L3N: Sales and Technical Specification Catalogue. 4 pages. ?5

      E900B EXCEL (Victoria) Filing and Sawing Machines Nos. "0", "0S", "2", "3", "3S" and 4 : Sales and Technical Specification Catalogues - the full data pack for these machines. 26 pages. ?0

      E900C Excel (Victoria) Grinders - a catalogue set showing the: No.0 Precision Semi-Universal(cylindrical and other); Model No.1 Vertical Spindle Surface; Model No.2 Surface; Model No.3/12 Hydraulic Surface; Model 3A Hydraulic Surface; Model 3C Hydraulic Surface; Model No.5 Tool & Cutter. 16 pages ?5

      E950 EXE Lathes and Surface Grinder. A data pack for the maker consisting of two catalogues for the 3.5" and 2.5" lathes and one for the Grinder - all with detailed technical specifications and illustrations of accessories. 12 pages. ?6

      F8 FAIRCUT Lathes. Sales sheet for the "Junior" lathe - 2 copies, with some differences. 2 pages ?

      F10 FAM (FAM-TITO) TV180 lathe. Sales and specification sheet. 2 pages. ?

      F15 FAMOT TUM-25B/35 Precision lathe (Polish - Polmach): Sales and Technical Specification Catalogue. 6 pages. ?2

      F17 FAMUP RAG 40 Milling and Drilling Machine with Multi-angle (Tilt front to back and rotate on vertical and horizontal axes) Table. Sales, Accessories and Technical Specification Catalogue. English, French, German and Italian text. 6 pages ?2

      F20 FAVORITE General Watchmaker's Tool Catalogue. A superb publication that lists and illustrates every conceivable tool and accessory for the watchmaking trade. 325 pages. ?25

      F20A Favorite Lathes: Lathes No. 2 and No 3 Sales & Specification Catalogues. A collection of literature including the associated pages from the Favorite Full-range Catalogue showing the No. 3 and No. 2 lathe and all their accessories. The lathe catalogue in is English. French and German and the main catalogue in English. 52 pages plus another 20 pages of illustrations taken from the catalogues and enlarged.?9

      F20B Favorite Lathes: Catalogue No.3 and 1B. 20 pages. ?5

      F20C Favorite Lathe No.3. Early Catalogue; not a perfect reproduction. 12 pages. ?5

      F25 FAY and SCOTT (USA) Lathes. Well-illustrated Catalogue of pattern makers lathes and accessories. 1905 32 pages. ?7

      F25A FAY and SCOTT Extension Gap Bed Lathes. Well-illustrated Catalogue 1906 24 pages. ?7

      F27 Feeler Toolroom lathe FTL-618 and Chucking (Capstan) lathe Type FHR-68. Two Catalogues. 18 pages. ?5

      F28 FEHLMANN PRECISION COORDINATE MILLING AND DRILLING MACHINES P10, P18S, Picomax 50, Picomax 50-CNC, Picomax 100XL-CNC and Picomax 100-CNC. Sales and Technical Specification Catalogue. 8 pages. ?5

      F30 FEINPRUF Tricurat 60 Hand-operated Surface Grinder. Sales, Technical Specification and Accessories Catalogue. 8 pages. ?5

      F30A FEINPRUF SH300 High-speed Relieving Lathe. Sales, Technical Specification and Accessories Catalogue. 8 pages. ?5

      F36 FELL Wood-turning lathes Types M.F., M.F.B. and M.F.F. Sales and Specification Catalogue. 6 pages. ?

      F36A FELL Wood Working machinery. Complete and detailed Full-range Catalogue Circa 1948. 169 pages. ?5

      F37 Fellows Gear Company: 50-Year Anniversary Booklet - a detailed account of the Company's founding, development and the machines it produced from 1896 until 1946. 50 pages. ?5

      F38 FERRANTI 5* Coordinate Inspection machine. Sales and Specification Folder. 7 pages. ?0

      F38 FERRARI (C.B.Ferrari) M1R, M2R, M1R-RQA, M2R-RQA Precision Universal Milling Machines. Sales and Technical Specification Catalogues. English and French Text. 32 pages ?5

      F40 FIELDING Lathes (Keighley, England). Sales, Technical Specification and Accessories Catalogue "Cygnet" and "Swan" Models. 4 pages. ?0

      F42 FIMAP TP-22-A Toolroom lathe. Sales, Technical Specification and Accessories Catalogue. 16 pages. ?5. Contains useful annotated diagrams showing the control system and function of all the levers and buttons.

      F42A FIMAP Jig Borer Model "Olympic". Sales and Technical Specification Catalogue. 14 pages. ?5

      F43 FIRTH-BROWN "Hardometer" hardness testing machine. A superb publication with many illustrations and detailed text 36 pages. ?7

      F44 Fischer (George Fisher +GF+). Explanatory catalogues explaining the function, tooling and one-off applications for Fischer lathes. 12 pages ?0

       

      F44A Fischer (George Fisher +GF+) KDM-2-7, KDM-9, KDM-A11, KDM-14, KDM-A18, KDM-A18-25, KDM-19, NDM-14, NDM-17, NDM-22, ZM-semi automatic and ZM-fully automatic lathes. Sales and Specification Catalogue. 20 pages (1975). ?7

       

      F44B Fischer (George Fisher +GF+) KDM-A11 and KDM-A18 Copying Lathes. Detailed and beautifully illustrated Sales and?Technical Specification Catalogue. 38 pages. ?0

       

      F44C Fischer (George Fisher +GF+) KDM-A Series Copying Lathes. Detailed and beautifully illustrated Sales and?Technical Specification Catalogue. 38 pages. ?0

       

      F44D Fischer (George Fisher +GF+) Type ZM End-turning Machines. Sales and Specification Catalogue. 26 pages (1975). ?7

       

      F44E Fischer (George Fisher +GF+) KDM Lathes. Detailed Information Booklet on the KDM-28/7-F that explains all the functions of the lathe, its capabilities and construction. 36 pages. ?5

       

      F44F Fischer (George Fisher +GF+) Accessories for KDM Lathes. Comprehensive Catalogue detailing the mechanical additions manufactured and the various items of tooling supplied. 65 pages. ?5

       

      F44Z Fischer (George Fisher +GF+) Straightening Machines Series TRM for sheet metal parts and strips with automatic levelling pressure and feed drive control. Detailed and well-illustrated Sales and?Technical Specification Catalogue together with three technical articles: an 4-page article explaining high-precision levelling of sheet metal parts on roller levelling machines; a 4-page article about roll levelling of flat parts for welding and a 6-page article concerning straightening circular saw blades with roll straightening machines. 25 pages. ?7

       

      F45 FITCHBURGH (USA) "So-swing" rapid production, multi-tool head lathe. 26 pages. ?5

      MS218 Flexispeed, Perris and Norfolk, Hector, Simat 101, Meteor, Meteor 2, Perris and Derivatives. A complete 150-page Data Pack containing everything ever published for these miniature lathes: Sales and Specification Sheets, Illustrated Parts Manuals, sheets of Assembly Instructions for the Perris version and the Flexispeed, Simat and Meteor. A separate 8-page Manual for the Meteor 2 is also included. Full-size "blue print"